Is HS PLA worth it over regular PLA?

Yes if the part takes load, impact or repeated handling. For display models and simple shapes, standard PLA is cheaper and stiffer.

How is it different from PETG?

HS PLA is easier to print, less stringy and needs no enclosure, but it softens at lower temperatures and is less chemical resistant than PETG.

What nozzle and bed temperatures does it use?

Print it in the standard PLA range, roughly 200–220 °C nozzle and a 50–60 °C bed. Start at the middle and adjust for your printer.

Does it need an enclosure?

No. Its low warping means it prints well on open-frame machines, which is its main advantage over ABS and ASA.

Does it fit a standard 1.75 mm printer?

It is 1.75 mm filament for common FDM printers with a standard hotend. Check your printer's filament diameter before ordering.

Should I dry it before printing?

If the spool has been open a while or prints pop and string, dry it first. PLA absorbs moisture and that shows up as rough surfaces and weak layers.

Where is the Flashforge HS PLA Filament cheapest?

At Flashforge, for $26.99, as of our latest check.

What do buyers say about the Flashforge HS PLA Filament?

Rated 4.9 out of 5 from 163 ratings.

Flashforge HS PLA Filament

Best price now

$26.99at FlashforgeChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Flashforge

Flashforge discount codes →

Flashforge HS PLA Filament

Best price now

$26.99at FlashforgeChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Flashforge

Flashforge discount codes →

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $26.99 at Flashforge on Nov 10.

Our take on the Flashforge HS PLA Filament

Flashforge HS PLA is a high-strength PLA filament made for functional parts rather than display models. It keeps PLA's easy printing and low warping but adds toughness and better layer bonding, so brackets, jigs and prototypes hold up under load. Compared with regular PLA it trades a little of the stiffness and crisp detail for impact resistance; compared with PETG it is easier to print and less stringy but softer and less heat resistant. Owners rate it highly, and the main complaints are about brittleness on the spool and the need to dry it.

Best forFunctional prototypes and mechanical partsLarge prints where warping is a worryMakers stepping up from standard PLAPrinters without an enclosure or heated chamber

Pros

Tougher and more impact resistant than standard PLA
Better layer bonding for load-bearing parts
Low warping on large, flat prints
Prints with familiar PLA settings on most machines
Smooth, precise surface finish

Cons

Still softens at low temperatures, unlike PETG or ABS
Less stiff than regular PLA on rigid parts
Filament can arrive brittle and snap on the spool
Needs drying if it absorbs moisture
Limited color choice compared with big PLA lines

Flashforge HS PLA Filament prices at every store

FlashforgeNew
In stockShips from Hong Kong SAR China · duties may applyReturn policy
$26.99Checked Nov 10
Visit Flashforge

What reviewers say

4.9 / 5163 ratings

Owners rate it very highly and describe it as a drop-in upgrade over standard PLA for parts that take stress. Most praise the strength and easy printing; the recurring complaints are brittle filament on the spool and moisture sensitivity.

What people mention

StrengthPraisedOwners say printed parts take knocks and bending better than standard PLA.
PrintabilityPraisedReviewers report it prints with ordinary PLA temperatures and settings on most machines.
WarpingPraisedLarge flat prints are said to stay down with little lifting at the corners.
BrittlenessCriticisedSome spools arrive brittle, and the filament snaps during a print.
MoistureMixedA few owners find it absorbs water and prints poorly until dried.
Color rangeCriticisedShoppers note fewer color choices than mainstream PLA brands.

About the Flashforge HS PLA Filament

Flashforge HS PLA is a high-strength PLA filament for 3D printing. It is a tougher, more durable alternative to regular PLA and keeps the easy printing of traditional PLA.

It has higher impact resistance and better layer bonding than regular PLA, so prints hold up better under stress. It is also less prone to warping, which helps with large prints and intricate designs.

The filament works with most 3D printers. It suits functional prototypes, mechanical parts and other uses that call for added durability.

Material: HS (high-strength) PLA
Strength: High strength and impact resistance
Printing: Easy to print, minimal warping
Compatibility: Most 3D printers
Uses: Durable prototypes, mechanical parts, functional parts

Questions and answers

Is HS PLA worth it over regular PLA?: Yes if the part takes load, impact or repeated handling. For display models and simple shapes, standard PLA is cheaper and stiffer.
How is it different from PETG?: HS PLA is easier to print, less stringy and needs no enclosure, but it softens at lower temperatures and is less chemical resistant than PETG.
What nozzle and bed temperatures does it use?: Print it in the standard PLA range, roughly 200–220 °C nozzle and a 50–60 °C bed. Start at the middle and adjust for your printer.
Does it need an enclosure?: No. Its low warping means it prints well on open-frame machines, which is its main advantage over ABS and ASA.
Does it fit a standard 1.75 mm printer?: It is 1.75 mm filament for common FDM printers with a standard hotend. Check your printer's filament diameter before ordering.
Should I dry it before printing?: If the spool has been open a while or prints pop and string, dry it first. PLA absorbs moisture and that shows up as rough surfaces and weak layers.
Where is the Flashforge HS PLA Filament cheapest?: At Flashforge, for $26.99, as of our latest check.
What do buyers say about the Flashforge HS PLA Filament?: Rated 4.9 out of 5 from 163 ratings.