
ANYCUBIC-KBS1BK0C-O
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Anycubic Kobra S1 is a fully enclosed CoreXY FDM printer with a 250×250×250 mm build volume. Its 320°C hotend handles PLA, PETG, TPU, ABS and ASA, and it prints at a recommended 300 mm/s with acceleration up to 10,000 mm/s². AI spaghetti detection, filament runout sensing and power loss recovery cut down on failed prints, and a quiet mode rated at 44 dB lets it run overnight. It suits makers who want ABS and ASA capability and an enclosure without moving up to a larger, pricier CoreXY machine.
In stockShips from South Africa · priced in ZAR (ZAR 8,608.70) · duties may applyReturn policy
The Anycubic Kobra S1 is a fully enclosed CoreXY FDM 3D printer with a 250 × 250 × 250 mm build volume. It uses linear rods on the X and Y axes and a single-motor, three-guide-pole Z-axis. The recommended print speed is 300 mm/s, with a maximum of 600 mm/s, and acceleration is recommended at 10,000 mm/s² with a maximum of 20,000 mm/s².
The hotend reaches up to 320°C, and the PEI spring steel heated bed reaches up to 120°C. Supported filaments are PLA, PETG, TPU, ABS, and ASA. A standard 0.4 mm nozzle is fitted, and 0.6 mm and 0.8 mm nozzles are compatible. Pressure advance and flow calibration are built in.
LeviQ3.0 auto-leveling handles bed calibration with Z-offset adjustment, and object-skip area leveling adds precision control. AI spaghetti detection, filament runout detection, filament entanglement detection, and power loss resume monitor jobs. A built-in 480P camera supports remote monitoring through the Anycubic APP over Wi-Fi. The 4.3-inch capacitive touchscreen supports nine languages, and the printer can also be controlled through slicing software, the Anycubic APP, or USB; it runs at ≤44 dB in Quiet mode and ≤46 dB in Standard mode.
It checks today's price at every store, compares the alternatives and answers in about a minute.