Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The AtomStack X20 Pro is a desktop laser engraver and cutter built around a 20W quad-diode module that combines four diode sources into one beam. It has a 400 x 400 mm working area, a 0.08 x 0.10 mm spot, 256-level grayscale for photo work, an offline touchscreen, and an included 10–30 L/min air-assist pump. It suits makers, small workshops and light production work that need more cutting power than a 5–10W diode machine. Against those entry models it cuts thicker wood and darker acrylic in fewer passes, but it is still a diode laser: it will not match a CO2 laser on clear acrylic or speed, and it needs ventilation and eye protection.
In stockShips from South Africa · priced in ZAR (ZAR 20,990.00) · duties may applyReturn policy
Owners of the X20 Pro generally rate the 20W head highly for cutting wood and plywood and for detailed engraving, and the air assist is seen as a real improvement over running without it. Common complaints center on fumes and smoke with an open frame, the noise of the air pump, and the limits of a diode laser on clear acrylic.
The AtomStack X20 Pro is a 20W desktop laser engraver and cutter with built-in air assist. It combines four diode sources into one concentrated beam for engraving and cutting. The working area is 400 × 400 mm.
The laser spot is compressed to 0.08 × 0.10 mm, which supports fine text, detailed artwork and accurate cuts. Grayscale engraving has 256 levels for smoother tonal transitions in photo engraving. The included air-assist pump has an adjustable flow of 10–30 L/min to help reduce smoke staining and give cleaner cut edges.
It can be controlled from a computer, a mobile app or the offline touchscreen terminal. The touchscreen lets supported projects run without a computer connected. It works with LightBurn and LaserGRBL. It engraves or marks suitable metals but does not cut bare metal.
