Do I need an enclosure to print this ABS?

Yes, practically. ABS shrinks as it cools, and an enclosure keeps the part warm so it does not warp or split between layers. It also contains the fumes, which should be vented or filtered.

What is a refill spool?

It is filament wound without the plastic spool. You mount it on a reusable Bambu Lab spool, which saves plastic waste. Without a reusable spool the refill cannot be loaded.

How fast can it print?

Bambu rates it for up to 300 mm/s. Real speeds depend on your hotend, cooling and part geometry; large flat parts usually need slower speeds to avoid warping.

Is ABS better than PETG for mechanical parts?

ABS handles higher temperatures and is tougher under impact, but PETG is easier to print, warps less and has less odor. Choose ABS when heat resistance matters and you have an enclosure.

Does it work on non-Bambu printers?

Yes, it is standard 1.75 mm filament and works on most FDM printers that can reach ABS temperatures, roughly 260 to 280 °C hotend and 90 to 100 °C bed. An enclosure is still recommended.

How should I store it?

Keep it sealed and dry. ABS absorbs moisture, which causes popping and rough surfaces, so store it with desiccant and dry it before long prints if it has been exposed.

Bambu Lab 3D Printer Filament ABS-Red-Refill

Best price now

$19.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Bambu Lab 3D Printer Filament ABS-Red-Refill

Best price now

$19.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $19.99 at Walmart on Nov 10.

Our take on the Bambu Lab 3D Printer Filament ABS-Red-Refill

Bambu Lab ABS is a 1.75 mm engineering filament sold as a refill spool for the reusable Bambu spool, in red. ABS gives parts high heat resistance and toughness, but it warps and smells while printing, so it needs an enclosed printer and good ventilation. Bambu's version is wound to tight diameter tolerances and rated for fast printing up to 300 mm/s, which puts it ahead of generic ABS on consistency. It suits makers printing mechanical parts, brackets and heat-exposed housings rather than beginners.

Best forMakers with an enclosed printerFunctional and mechanical partsHeat-resistant printsHigh-speed printing on Bambu machines

Pros

Tight diameter tolerance for consistent extrusion
Rated for printing up to 300 mm/s
Good layer bonding and low warping for ABS
Vacuum-sealed with desiccant
Refill format reuses the Bambu spool
Works on Bambu X1, P1P, P1S, A1 series and most 1.75 mm FDM printers

Cons

ABS needs an enclosure and ventilation
Strong odor and fumes while printing
More prone to warping and cracking than PLA or PETG
Refill only, so you need a reusable spool

Bambu Lab 3D Printer Filament ABS-Red-Refill prices at every store

WalmartNew
In stockSold by FuturologyReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$19.99+ $13.50 shippingChecked Nov 10
Visit Walmart

About the Bambu Lab 3D Printer Filament ABS-Red-Refill

This is Bambu Lab ABS 3D printer filament in red, sold as a refill. It is made for precise dimensional accuracy, a consistent diameter and reliable adhesion. It suits both functional prototypes and final parts.

The filament has low warping and good layer bonding. It is optimized for high-speed printing up to 300mm/s and gives stable extrusion and a smooth surface finish. It suits mechanical parts, heat-resistant applications and engineering-grade prints.

It is vacuum-sealed with desiccant to protect it from moisture. Store it in a dry, cool place. Detailed print settings are included on the spool or package.

Brand: Bambu Lab
Material: ABS
Color: Red
Filament diameter: 1.75mm
Compatibility: Bambu Lab X1, P1P, P1S and A1 series; most 1.75mm FDM printers
Max print speed: Up to 300mm/s
Packaging: Vacuum-sealed with desiccant
Storage: Store in a dry, cool place
Print settings: Printed on the spool or package

Specifications

color: RedSource

Questions and answers

Do I need an enclosure to print this ABS?: Yes, practically. ABS shrinks as it cools, and an enclosure keeps the part warm so it does not warp or split between layers. It also contains the fumes, which should be vented or filtered.
What is a refill spool?: It is filament wound without the plastic spool. You mount it on a reusable Bambu Lab spool, which saves plastic waste. Without a reusable spool the refill cannot be loaded.
How fast can it print?: Bambu rates it for up to 300 mm/s. Real speeds depend on your hotend, cooling and part geometry; large flat parts usually need slower speeds to avoid warping.
Is ABS better than PETG for mechanical parts?: ABS handles higher temperatures and is tougher under impact, but PETG is easier to print, warps less and has less odor. Choose ABS when heat resistance matters and you have an enclosure.
Does it work on non-Bambu printers?: Yes, it is standard 1.75 mm filament and works on most FDM printers that can reach ABS temperatures, roughly 260 to 280 °C hotend and 90 to 100 °C bed. An enclosure is still recommended.
How should I store it?: Keep it sealed and dry. ABS absorbs moisture, which causes popping and rough surfaces, so store it with desiccant and dry it before long prints if it has been exposed.
Where is the Bambu Lab 3D Printer Filament ABS-Red-Refill cheapest?: At Walmart, for $19.99, as of our latest check.