What is silk PLA good for?

Decorative and display prints where a glossy, slightly metallic look matters: figurines, vases, props and gifts. It is a poor choice for parts that take stress or heat.

Does it work on printers other than Bambu Lab's?

Yes. It is standard 1.75 mm PLA, so any FDM printer set up for 1.75 mm filament can run it. You will need to set temperatures and speeds yourself outside Bambu's profiles.

What nozzle temperature should I use?

Silk PLA generally wants a hotter nozzle than plain PLA, roughly in the 220–240 °C range, with a heated bed around 55–65 °C. Print slower than usual to keep the gloss even.

Is it as strong as regular PLA?

No. Silk additives make the filament more brittle and reduce layer adhesion, so it is weaker than standard PLA and much weaker than PETG or ABS.

Does it come on a reusable spool?

It ships on a rigid spool that fits standard spool holders. Check that your holder accepts the spool's outer diameter before printing.

Can I dry it like other PLA?

Yes. If it absorbs moisture and starts stringing or popping, dry it at low heat, around 45–50 °C, since silk PLA softens at lower temperatures than standard PLA.

Bambu Lab 3D Printer Filament PLA Silk+ - Champagne-Filament with spool

Best price now

$24.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Bambu Lab 3D Printer Filament PLA Silk+ - Champagne-Filament with spool

Best price now

$24.99at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $24.99 at Walmart on Nov 10.

Our take on the Bambu Lab 3D Printer Filament PLA Silk+ - Champagne-Filament with spool

Bambu Lab PLA Silk+ is a 1.75 mm silk-finish PLA on a spool, made for FDM printers that take standard 1.75 mm filament. The draw is the surface: silk PLA prints with a glossy, slightly metallic sheen that ordinary PLA and matte PLA cannot match, so it suits decorative pieces, figurines and display models rather than functional parts. Against generic silk PLA, Bambu's version is tuned for its own printers and profiles, which makes setup easier, but silk blends are typically weaker and less layer-adhesive than standard PLA, and they print best at higher temperatures and slower speeds.

Best forDecorative prints and display modelsFigurines, vases and cosplay propsBambu Lab printer owners using stock profilesShoppers wanting a glossy finish without post-processing

Pros

Glossy silk sheen that hides layer lines
Standard 1.75 mm diameter fits most FDM printers
Works with Bambu Lab's built-in filament profiles
Consistent diameter for reliable extrusion
Rigid spool that feeds cleanly

Cons

Silk PLA is more brittle than standard PLA
Weaker layer bonding, so poor for load-bearing parts
Needs higher nozzle temperatures and slower speeds
Gloss can vary with temperature and print speed

Bambu Lab 3D Printer Filament PLA Silk+ - Champagne-Filament with spool prices at every store

WalmartNew
In stockSold by FuturologyReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$24.99+ $13.50 shippingChecked Nov 10
Visit Walmart

About the Bambu Lab 3D Printer Filament PLA Silk+ - Champagne-Filament with spool

Bambu Lab PLA Silk+ in Champagne is a 3D printer filament made from PLA. It comes on a spool and is 1.75 mm in diameter.

The filament is easy to print. It gives smooth finishes and consistent performance. It is compatible with a wide range of 1.75 mm 3D printers.

Material: PLA
Diameter: 1.75 mm
Color: Champagne (Beige)
Series: PLA Silk+
Format: Filament with spool
Compatibility: 1.75 mm 3D printers

Specifications

color: BeigeSource

Questions and answers

What is silk PLA good for?: Decorative and display prints where a glossy, slightly metallic look matters: figurines, vases, props and gifts. It is a poor choice for parts that take stress or heat.
Does it work on printers other than Bambu Lab's?: Yes. It is standard 1.75 mm PLA, so any FDM printer set up for 1.75 mm filament can run it. You will need to set temperatures and speeds yourself outside Bambu's profiles.
What nozzle temperature should I use?: Silk PLA generally wants a hotter nozzle than plain PLA, roughly in the 220–240 °C range, with a heated bed around 55–65 °C. Print slower than usual to keep the gloss even.
Is it as strong as regular PLA?: No. Silk additives make the filament more brittle and reduce layer adhesion, so it is weaker than standard PLA and much weaker than PETG or ABS.
Does it come on a reusable spool?: It ships on a rigid spool that fits standard spool holders. Check that your holder accepts the spool's outer diameter before printing.
Can I dry it like other PLA?: Yes. If it absorbs moisture and starts stringing or popping, dry it at low heat, around 45–50 °C, since silk PLA softens at lower temperatures than standard PLA.
Where is the Bambu Lab 3D Printer Filament PLA Silk+ - Champagne-Filament with spool cheapest?: At Walmart, for $24.99, as of our latest check.