Bambu Lab H2C 10W Laser Full Combo 3D Printer

The Bambu Lab H2C Combo 3D printer is the latest flagship in the H-series lineup. It offers a perfect balance of high-precision engineering, printing, and advanced multicolor automation.

Coloring or assembling multicolor complex parts is a thing of the past. Print the product from start to finish in multiple colors without stopping to change filament and clean nozzles. You can print with up to 7 different materials without the need for nozzle purging, with minimal waste. With the advent of the H2C, multi-material printing of an entire part is no longer a dream – order the Bambu Lab H2C and start printing.

Features of the Bambu Lab H2C 3D Printer

• The patented Vortek Hotend Change system supports up to six interchangeable nozzles.

• Fully automatic filament replacement, specialized hotends for specific filaments.

• Fully automatic nozzle offset calibration: movement accuracy of 50 microns.

• 59 sensors read parameters and transmit parameters for settings correction.

• The device can be optimized for printing up to seven colors simultaneously without unnecessary material waste.

• Full pre-print check, scanning the print surface for debris at each start.

• When connected to the AMS system, the number of filaments can reach 24.

• Contactless communication, memory of each hotend.

• Precise and fast (8 seconds) inductive nozzle heating.

• Closed-loop servo extruder.

• Build volume of 330*320*325 mm³.

• Error detection throughout the filament path using real-time AI.

• Nozzle heating up to 350°C.

• Active chamber heating up to 65°C.

• Additional laser and cutting module with 10W/40W power.

To make the most of the H2C, you will need at least two 4-slot AMS modules and six corresponding inductive hotends. The Ultimate Set includes these modules, as well as additional hotends for expanded capabilities.