
Bambu Lab H3C 9 Toolhead 3D Printer Enterprise Bundle
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Bambu Lab H3C is a tool-changer 3D printer with nine independent PrintTools, each with its own filament path and heater. Material switches take as little as 6 seconds with purge waste as low as 0.038 g, so multi-color and multi-material jobs waste far less filament than single-nozzle AMS setups. It pairs with the enclosed AMS 3H, which has nine sealed slots, automatic loading and an 85°C dryer, plus a 65°C actively heated chamber for engineering materials. It suits small print farms and workshops running many materials; hobbyists rarely need nine tools.
In stockReturn policy
The Bambu Lab H3C is a multi-material 3D printer built around Swaptek 9-tool changing. Each of the nine PrintTools holds its own filament, filament path and heater, so material changes take as little as 6 seconds and a tool change takes 3.4 seconds. Because nothing has to be retracted before the next filament loads, purge waste drops to as little as 0.038 g per change. Active Pre-Heat warms the next nozzle while the current one is still printing.
The printer pairs with the AMS 3H, a fully enclosed filament system with nine sealed slots. A spool dropped into any slot is detected, routed and loaded into its PrintTool automatically. Two dedicated drying slots reach 85°C for drying PA, PC, PET, TPU and carbon-fiber filaments on demand or, with selected materials, mid-print. Existing Bambu Lab AMS units connect through PrintTool No. 1 for up to 24 spools in a single print.
The toolhead and X-axis assembly are 40% lighter than the H2D, with travel speeds up to 1,400 mm/s and acceleration up to 25,000 mm/s². All nine hardened-steel nozzles reach 350°C, and dual-zone chamber heating reaches 65°C to help prevent warping. FlexFeed handles both 1.75 mm and 2.85 mm filament, printing TPU as soft as 75A at up to 3× the flow rate of previous-generation printers. AI-powered monitoring and four layers of cross-flow cooling round out the machine, and optional CraftTools add cutting, drawing, debossing and foil transfer.






