This is a low-temperature build plate for Bambu Lab X1, X2, P1, P2 and A1 series 3D printers. It is an official Bambu Lab replacement part. It has a SuperTack coating that holds PLA and PETG prints in place even when the plate is not very hot. The coating helps prevent warping on large models and works on uneven surfaces.
The coating stays tacky after repeated use, with less than 20% loss of adhesion after 300 prints. The plate does not need to be heated to hold prints, which saves energy. The underside of printed objects gets a smooth, matte texture.
The older 256 mm × 256 mm plate is not compatible with the automatic detection function on 2nd-generation machines (P2S and later models). Raising the heated bed temperature improves adhesion, so it can be adjusted to the level of grip needed.
- Compatibility
- Bambu Lab X1, X2, P1, P2 and A1 series
- Coating
- SuperTack, specially designed
- Plate material
- Spring steel
- Thickness
- Coating 0.05 mm; plate 0.4 mm
- Max surface temp
- 120 °C
- Print area
- 256 x 256 mm usable
- Filaments
- PLA and PETG; do not print with TPU, which would damage the plate
- Package size
- 297 x 270 x 15 mm
- Package weight
- 1.035 kg
- Care
- The surface is soft, so take care when removing prints with a spatula
- Before auto-leveling
- Rub the nozzle several times on the plate's cleaning zone to remove residual material. The coating in this zone wears down over time, which is normal and does not affect print quality or nozzle life.
- Warranty
- Consumable part that wears over time. Covers manufacturing defects only, not cosmetic damage such as scratches, dents or cracks.