It improves motion accuracy to below 50μm. It compensates for mechanical variances between machines and for wear over time, such as belt loosening.
It uses a matrix of 10⁴ Encode Markers and optical measurements with 5μm resolution. The calibration is distance-independent, so accuracy stays consistent regardless of model size. Its effect is more pronounced on larger prints.
The Vision Encoder works with Bambu Studio's Auto Hole-Contour Compensation, a temperature-controlled chamber and pre-tuned filament parameters. Together they support tight-fitting assembly of printed parts on the Bambu Lab H2. A calibration takes about 5 minutes and keeps accuracy high for weeks.
- Motion accuracy
- Below 50μm
- Measurement resolution
- 5μm optical
- Encode markers
- Matrix of 10⁴ markers
- Calibrates
- XY axes
- Calibration time
- About 5 minutes
- Recalibration
- Every two weeks recommended for high-precision work
- Software feature
- Bambu Studio Auto Hole-Contour Compensation
- Before use
- Remove the transparent protective film; make sure the toolhead camera works with no HMS errors
- Usage note
- For calibration only, not a build plate; remove and store after calibration