Bambu Lab X2D 3D Printer
Best price now
Compared across 2 stores. Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Bambu Lab X2D 3D Printer prices at every store
- Ultimate 3D Printing StoreNew
In stockReturn policy
$789.00Verified - Swing DesignNew
In stockReturn policy
$899.00Verified
Also available at
- Shop3D.caCheck price at Shop3D.ca
- HartSmart ProductsCheck price at HartSmart Products
From Ultimate 3D Printing Store
- Dual-nozzle 3D printing: main nozzle prints the part, auxiliary nozzle handles supports
- Faster multi-color printing and cleaner support removal
- 300 °C nozzle and 65 °C actively heated chamber
- Closed-loop servo motor extruder (PMSM servo system)
- Full filament path AI detection
- 256 × 256 × 260 mm³ print volume
About the Bambu Lab X2D 3D Printer
Bambu Lab X2D - The Dual Nozzle 3D Printer For Everyone
Stop overthinking with support - start peeling it off clean.
The main nozzle prints the part. The auxiliary nozzle handles the support¹. X2D hands all the messy support work to a helper nozzle with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean.
Add more color, more details and more fun.
Tough and soft. In one print
Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come of the bed ready to use.
Swap Colors Instantly
Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste.
Your browser does not support our video.
Tap. Switch. Done. Unlike traditional motor-driven systems, X2D packs a Gear-and-Trigger mechanism into the toolhead. The nozzle-change lever taps the trigger arm, driving an internal gear train to change the nozzle. No extra weight. Just a clean swap.
A lighter toolhead means less inertia and vibration. Even at full speed, surfaces stay flawless - all the way to the top.
Cool it. Before gravity makes it droop.
Two intakes are always better than one . Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
Your browser does not support our video.
Hot Enough Isn't Enough. Heat It Even.
The X2D pairs a 300 °C nozzle with a 65 °C actively heated chamber - hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn't the point - the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat.
Your browser does not support our video.
Calibration adapts to wear and material changes.
Questions and answers
- Where is the Bambu Lab X2D 3D Printer cheapest?
- At Ultimate 3D Printing Store, for $789.00, as of our latest check.
- What do buyers say about the Bambu Lab X2D 3D Printer?
- Rated 5 out of 5 from 1 ratings.
- Where can I buy the Bambu Lab X2D 3D Printer?
- 4 stores we checked sell it, including Ultimate 3D Printing Store, Swing Design, Shop3D.ca, HartSmart Products.
