How is the H2C different from a single-nozzle AMS printer?

The Vortek system parks and swaps six induction hotends rather than purging one nozzle between colors. That means faster color changes and far less wasted filament on multi-color prints.

What can the seventh nozzle be used for?

It can run a support material such as a water-soluble or breakaway filament, or act as a seventh color. That keeps supports from sharing a nozzle with your model colors.

Which filaments can the heated chamber handle?

With a 65 °C chamber and 350 °C nozzles, the H2C is built for ABS, ASA, PC and other high-temperature engineering plastics, plus common PLA and PETG.

What hotends come in the box?

You get four 0.4 mm hardened steel induction hotends (one installed, three spare), one 0.2 mm hotend and one 0.6 mm hotend. All are swappable through the Vortek system.

Does it need a special power outlet?

At 220 V it can draw up to 1800 W, so a dedicated circuit is sensible. On 110 V the maximum is 1250 W, which limits how fast the bed and chamber heat up.

Is the H2C a good first printer?

Not really. Its size, weight, power draw and multi-hotend calibration suit users who already know 3D printing and want multi-color or high-temperature capability.