It checks today's price at every store, compares the alternatives and answers in about a minute.
Bond Craftor Deep Pour is a two-part epoxy for casting thick slabs, river tables and embedded objects. It pours up to 2 inches per layer for 2 to 4 inch total depth, mixes 2A:1B by volume, and self-levels thanks to low viscosity. The slow exothermic reaction gives 60 to 80 minutes of working time and keeps bubbles down, and the cured resin reaches 83D hardness with UV stabilizers against yellowing. It suits woodworkers and resin casters doing deep, clear pours; against thinner casting resins it trades speed for depth per layer, and against other deep-pour brands buyers report consistent cure and good bubble release.
Availability unknown
Lowest price we've seen: $469.99 on Nov 3 at Bond Craftor. Tracked across 1 store since Nov 3.
Buyers report consistent curing times, easy bubble release and very clear results when left untinted. They say it accepts dye and mica well, and the brand carries a good word of mouth among casters.
This is a deep pour epoxy resin kit for casting and coating projects. You can pour up to 2 inches per layer and build up to a 2 to 4 inch depth. The resin has a low viscosity, so it self-levels for a smooth finish.
The resin reacts slowly as it cures. This keeps heat low and produces few bubbles. UV stabilizers in the formula resist yellowing over time. The cured resin is crystal clear with a hardness of 83D.
Mix the two parts at a ratio of 2A to 1B by volume. Measure accurately for the best results. Working time is 60 to 80 minutes at room temperature.
