
BTF-LIGHTING 9.8FT CCT COB LED Strip
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A 9.8 ft (3 m) 24V COB LED strip with 640 LEDs per meter, tunable between 3000K warm white and 6000K cool white. The dense COB layout gives a continuous, dot-free glow that looks smoother than standard SMD strips, and the strip is UL listed with a double-layer copper PCB for heat dissipation. It ships as the strip only, so you need a 24V driver and a controller (WiFi, Zigbee, RF, WLED or similar) to run it. Best for DIY under-cabinet, shelf, stair and backlighting projects where a seamless line of light matters more than plug-and-play simplicity.
In stockReturn policy
Owners of BTF-LIGHTING COB strips generally praise the smooth, even light and the strong output for the size. Common complaints center on the separate driver and controller requirement and on adhesion over rough or dusty surfaces.
The BTF-LIGHTING CCT COB LED strip is a 9.8 ft flexible LED strip that runs on DC 24V and carries 640 LEDs per meter in a high-density FCOB layout. The close spacing gives an even, uniform light with no dark spots, and the strip is softer in appearance than traditional SMD strips with consistent color.
The strip is tunable between warm white 3000K and cool white 6000K, so one strip covers both ends of the range and everything between. It works with dimmable LED drivers and a range of controllers, including WiFi apps, Alexa, Google Home for voice on/off and brightness and color temperature adjustment, RF remotes, Bluetooth Mesh, Zigbee, WLED, ESP32 and Tuya.
The strip is built on a double-layer copper PCB for conductivity and heat dissipation, is UL listed, and has a rated lifespan of 65,000+ hours. It has a strong 3M adhesive backing for tool-free installation; clean and dry the surface first. The strip can be cut at the marked solder spots and has two 4-pin, 3-wire plugs (+V, CW, WW) on its ends, one female and one male, so it can also be connected end to end in series. It is intended for indoor use, such as bedrooms, cabinets, stairs, kitchens and DIY backlighting. The strip is sold on its own, without a power supply or controller.



