- What power supply do I need for the full 20 m reel?
- A 24V constant-voltage driver rated above the reel's total wattage, with headroom of about 20 percent. Check the strip's watts-per-meter figure and multiply by 20 m. For long runs, a higher-capacity driver plus power injection at both ends works better than one small driver.
- Can I cut it to length?
- Yes. COB strip has marked cut points, usually every few centimeters. Cut only on those marks and reseal the end, since cutting elsewhere breaks the circuit.
- Will the far end be as bright as the start?
- On a single 20 m feed, voltage drop makes the far end dimmer and can shift its color. Feed power at both ends, or inject power every 5–10 m, to keep brightness even.
- Is 6000K too blue for a living room?
- It reads cool and slightly blue, closer to daylight than to warm white. It works well in kitchens, garages and workspaces; for bedrooms and lounges most people prefer 2700–3000K.
- Can I dim it?
- Yes, with a 24V-compatible dimmer on the driver's output or a dimmable driver. Use a PWM dimmer rated for the load; cheap leading-edge dimmers can cause flicker.
- What is in the box?
- The 20 m COB strip reel only. No power supply, controller, connectors or mounting clips are included, so plan for a driver, wiring and fixings.
- Where is the COB LED Strip 20m, 480 LEDs/m, 24V, 6000K (No Power Supply) cheapest?
- At Amazon, for $14.99, 86% under what the other stores charge, as of our latest check.
- Where can I buy the COB LED Strip 20m, 480 LEDs/m, 24V, 6000K (No Power Supply)?
- 3 stores we checked sell it, including Walmart, The Home Depot, Amazon.