Prices are checked against each store and labelled with when.
A small 12V electric pump sold as an oil extractor, scavenge pump and fuel transfer pump. It runs off a car battery or lighter socket through a 2.5 m harness and moves about 1 L per minute of warm oil, with a 1.2 m thin inlet hose and a 1.5 m outlet hose. It suits DIY oil changes and one-off fluid transfers where a drain plug is hard to reach. Against branded extractors it is bare-bones: no reservoir, no clamps, no instructions, and plastic construction.
In stockSold by Appliances storeReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a 12V electric pump for moving oil and other fluids, used for draining a sump, scavenging oil or transferring fuel. It runs on DC 12V to 13.5V and draws 5A at 60W.
The pump body is plastic. The inlet pipe is 1.2 m long with a 6 mm outer diameter and a 4 mm inner diameter, and the outlet pipe is 1.5 m long with a 12 mm outer diameter and a 10 mm inner diameter. The wiring harness is 2.5 m long and connects to a car battery or a lighter power supply.
It moves up to 250 L per hour, and warm oil at 40 to 60 degrees flows at about 1 L per minute. An installation guide is not included, and professional installation is recommended.
It checks today's price at every store, compares the alternatives and answers in about a minute.







