The Car Remote Start Kit with App Control is a remote start and alarm system for a car. It includes an ignition system controller, two remote control keys, two install wiring harnesses, a start/stop button and an instruction sheet. A phone app controls the door locks, the engine and the trunk, and the round push-button switch starts and stops the engine.
The controller runs on DC 12 V ± 3 V, with a static current under 15 mA and an output current of 30 A for ACC/ON/START and 5 A for the turn signal. It operates from -40 to +80 °C, at 10% to 95% relative humidity and 86 to 106 kPa atmospheric pressure, on a high frequency of 433.92 MHz. Each remote key runs on 6 V with a static current under 5 µA and takes two CR-2016 batteries.
The engine can be started and stopped remotely from the app or the remote, and the remote turns the system on for 10 minutes and then switches it off on its own. The car search function sounds the horn and flashes the direction lights. The alarm triggers on an illegal door opening or on the foot brake, and the system checks the handbrake and the oil pump at start-up. The trunk opens remotely when the original car has its own trunk motor, and the system remembers its settings after a power failure and has an emergency reset function.
- Controller Voltage
- DC 12 V ± 3 V
- Controller Static Current
- Under 15 mA
- Output Current
- 30 A for ACC/ON/START; 5 A for turn signal
- Operating Temperature
- -40 to +80 °C
- Relative Humidity
- 10% to 95%
- Atmospheric Pressure
- 86 to 106 kPa
- High Frequency
- 433.92 MHz
- Remote Key Voltage
- 6 V
- Remote Static Current
- Under 5 µA
- Remote Battery
- CR-2016 x 2
- In the Box
- 2 remote control keys, 1 ignition system controller, 2 install wiring harnesses, 1 start stop button, 1 instruction
- Weight
- 520 g