Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A 1.75 mm PETG filament blended with milled carbon fiber, made in Indiana. The carbon adds stiffness and a slightly textured matte black finish, and it prints at PETG temperatures (240–265°C nozzle, 60–78°C bed). It is mildly abrasive, so it needs a hardened or wear-resistant nozzle of 0.40 mm or larger. Compared with plain PETG it is stiffer and more dimensionally stable; compared with nylon-CF blends it is easier to print and less moisture-sensitive, but less tough.
In stockReturn policy
Rated 4.9 from 159 ratings, buyers are consistently positive. They report clean prints, a good matte finish and steady diameter. The main caution is nozzle wear, which buyers expect from a carbon-filled filament.
Carbon Fiber Extreme Black PETG PRO is a PETG filament reinforced with milled carbon fiber. It has a deep, opaque black color and a slightly textured finish. It is made in Indiana, USA, and is compatible with AMS.
The filament is mildly abrasive, so use a wear-resistant nozzle of 0.40 mm or larger. Start with a nozzle temperature of 240-265°C and a heated bed temperature of 60-78°C, then tune the settings for your printer and part.
