PETG 3D Printer Filament 1 kg

Filamatrix's PETG 3D Filament is a great alternative for makers looking to branch out from PLA. PETG has physical properties similar to ABS, but prints much easier with very little warping. It adheres to a variety of surfaces and can even print without a heated bed. It has very good layer-to-layer adhesion during prints, which makes for high strength and stiff parts. PETG Filament is naturally transparent, and printed parts have a smooth, glossy finish.

Our PETG Filament is proudly made in the USA and has the tightest diameter tolerance on the market. Filamatrix filaments are designed and developed by engineers with 50+ years of experience in plastic extrusion. All Filamatrix products are repeatedly tested for color uniformity and physical properties through an in-house print lab, consisting of numerous printer manufacturers. Physical properties of printed test bars are checked by a certified outside lab.

TECHNICAL SPECIFICATIONS

• Recommended nozzle temperature: 225° - 255° C

• Recommended bed temperature: 55° - 85° C

• Recommended drying temperature: 60° C, 6-12 hours

TIPS FOR OPTIMAL PRINTING

• While a heated bed is not required for printing, starting around 70 °C may give better results.

• PETG adheres to a variety of build surfaces (PEI, glass, PET tape, etc.).

DATA SHEETS

• Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

A FEW WORDS ABOUT DRYING

• All 3D printer filaments are at least somewhat prone to absorbing water (hydroscopic)

• PETG absorbs moisture faster than PLA, so it may be noticeable sooner