What temperatures should I print CC3D PETG at?

The maker recommends a 235-245°C nozzle and an 80-100°C bed. Start at the middle of both ranges and adjust for your printer and cooling.

Is PETG harder to print than PLA?

Yes. PETG needs higher temperatures, slower speeds and less part cooling, and it strings more easily. It is still easier than ABS and gives much better toughness than PLA.

Does the filament need drying before use?

PETG is moisture-sensitive. If the spool has been open a while or you hear popping during printing, dry it before a long print and store it back in the resealable foil bag.

What is the spool weight and diameter?

It is a 1kg spool of 1.75mm filament, with dimensional accuracy rated at +/- 0.05mm.

What is it best used for?

Mechanical parts, brackets, jigs and robotics components that need impact strength and some flexibility. It is less suited to fine detail models where PLA gives cleaner surfaces.

Where is the CC3D PETG Filament Black 1KG 1.75mm cheapest?

At Walmart, for $12.99, as of our latest check.

What do buyers say about the CC3D PETG Filament Black 1KG 1.75mm?

Rated 4 out of 5 from 5 ratings.

CC3D PETG Filament Black 1KG 1.75mm

Best price now

$12.99at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

CC3D PETG Filament Black 1KG 1.75mm

Best price now

$12.99at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $12.99 at Walmart on Nov 11.

Our take on the CC3D PETG Filament Black 1KG 1.75mm

CC3D's PETG filament is a 1.75mm, 1kg spool aimed at everyday functional printing. PETG sits between PLA and ABS: it is tougher and more impact-resistant than PLA, easier to print than ABS, and it resists moisture poorly, so the resealable foil bag matters. Dimensional accuracy is rated at +/- 0.05mm, and the recommended settings are a 235-245°C nozzle and an 80-100°C bed. Against better-known filament brands it competes on toughness and price rather than on tight spool-winding or drying consistency, so dry it before a long print and expect to tune temperatures and cooling.

Best forFunctional and mechanical partsRobotics and bracketsMakers moving up from PLAPrints that need impact strength

Pros

Tough and impact-resistant, closer to ABS than PLA
Easier to print than ABS
Dimensional accuracy rated +/- 0.05mm
Works for mechanical parts and robotics
Vacuum-sealed with a resealable foil bag

Cons

Absorbs moisture, so it needs dry storage
High nozzle and bed temperatures
Stringing and oozing are common with PETG
Spool winding and color consistency vary by batch

CC3D PETG Filament Black 1KG 1.75mm prices at every store

WalmartNew
In stockSold by CC3DReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$12.99Checked Nov 11
Visit Walmart

About the CC3D PETG Filament Black 1KG 1.75mm

This is a black PETG filament for 3D printing. It is 1.75mm in diameter with a dimensional accuracy of +/- 0.05mm. It comes as a 1 kg roll in vacuum-sealed packaging.

PETG is strong like ABS and easy to print like PLA. It has high toughness and impact strength, is very flexible, and is recyclable. It is widely used for mechanical parts and robotics.

PETG is sensitive to moisture. After use, put the filament back into the resealable aluminum foil bag to keep print results consistent.

Material: PETG
Color: Black
Diameter: 1.75mm
Accuracy: +/- 0.05mm
Weight: 1 kg per roll
Nozzle temp: 235°C to 245°C (recommended)
Bed temp: 80°C to 100°C
Packaging: Vacuum sealed; resealable aluminum foil bag

Specifications

color: ClearSource

Questions and answers

What temperatures should I print CC3D PETG at?: The maker recommends a 235-245°C nozzle and an 80-100°C bed. Start at the middle of both ranges and adjust for your printer and cooling.
Is PETG harder to print than PLA?: Yes. PETG needs higher temperatures, slower speeds and less part cooling, and it strings more easily. It is still easier than ABS and gives much better toughness than PLA.
Does the filament need drying before use?: PETG is moisture-sensitive. If the spool has been open a while or you hear popping during printing, dry it before a long print and store it back in the resealable foil bag.
What is the spool weight and diameter?: It is a 1kg spool of 1.75mm filament, with dimensional accuracy rated at +/- 0.05mm.
What is it best used for?: Mechanical parts, brackets, jigs and robotics components that need impact strength and some flexibility. It is less suited to fine detail models where PLA gives cleaner surfaces.
Where is the CC3D PETG Filament Black 1KG 1.75mm cheapest?: At Walmart, for $12.99, as of our latest check.
What do buyers say about the CC3D PETG Filament Black 1KG 1.75mm?: Rated 4 out of 5 from 5 ratings.