What temperatures should I print SUNLU PETG at?

SUNLU recommends 230–240°C at 50–100 mm/s, or 240–260°C at 100–200 mm/s. Its product page lists up to 260°C and speeds up to 300 mm/s.

How much filament is on a spool?

Each spool holds 1 kg of 1.75 mm PETG, roughly 320 m.

Why is my print stringing?

PETG absorbs moisture, and wet filament oozes and strings. Dry the spool and store it sealed, and stringing drops.

Is PETG better than PLA for my part?

PETG is tougher and more impact-resistant and handles outdoor use; PLA is stiffer and easier to print. Choose PETG for parts that flex, take hits or sit outside.

Does it work for transparent or diffuser prints?

Yes. Owners use the white PETG for light diffusers and semi-transparent parts, and SUNLU lists good transparency for its colors.

One 1 kg spool of 1.75 mm PETG filament.

Where is the SUNLU PETG Filament 85183 cheapest?

At SUNLU, for $10.49, as of our latest check.

What do buyers say about the SUNLU PETG Filament 85183?

Rated 5 out of 5 from 19 ratings. Buyers like: Great quality and consistent prints over months of use; Melts smoothly and evenly for hassle-free printing; Excellent layer adhesion and sticks well to the bed. Common complaints: Increased flowability makes moisture absorption cause stringing and oozing; Shipping options need fixing; SpeedX called a horrible last-mile carrier.

SUNLU PETG Filament 85183 Price History: Lowest $10.49 at SUNLU

What reviewers say

5 / 519 ratings

Owners rate it highly and describe consistent prints over months of use, smooth melting and good bed adhesion. Complaints center on moisture-driven stringing and oozing rather than the filament's strength.

What people mention

Layer adhesionPraisedOwners say layers bond well and prints hold together under stress.
Print consistencyPraisedBuyers report smooth, even melting and repeatable results over months.
Bed adhesionPraisedReviewers say it sticks well to the bed.
StringingCriticisedMoisture absorption leads to stringing and oozing, so drying the spool helps.
TransparencyPraisedThe white filament is used for light diffusers and semi-transparent prints.
RefillsCriticisedBuyers note PETG refill spools are not yet offered.

From SUNLU

High toughness—impact-resistant and acid & alkali durable
Vivid colors with excellent transparency for stunning prints
Excellent layer adhesion, reducing warping risks
Diameter: 1.75 ± 0.02 mm
Printing temperature: 240-260℃, speed ≤300mm/s
Net weight 1 kg per spool; 1.75 mm 1 kg ≈ 320 m

Sizes: 1KG, 1KG*3, 1KG*6, 1KG*10
Materials: PETG
Fit: Diameter 1.75 ± 0.02 mm
Care: Dry at 60-65 °C in a blast drying oven; keep container humidity < 20% RH (sealed, with desiccant)
Returns: If you're not totally satisfied, contact the store and they'll work with you to make it right (support@sunlu.com)
Shipping: Free shipping to most of USA, EU, UK, CA and AU regions; non-pre-sale orders generally delivered in 1-7 working days
Packs: Buy 4 rolls 5% off, 7 rolls 10% off, over 10 rolls 15% off; 3, 6 and 10 roll bundles of black PETG
In the box: 1 kg spool of PETG filament

About the SUNLU PETG Filament 85183

This is a 1.75 mm PETG filament for 3D printing, supplied on a 1 kg spool. It has excellent layer adhesion, which reduces the risk of warping. Prints come out smooth and strong.

PETG is tough and impact-resistant, so printed parts can take bumps and drops. It is also acid and alkali durable. Prints keep their properties over time and are suitable for indoor and outdoor use. The filament is made to reduce stringing and clogging, and it prints in vivid colors with excellent transparency.

Material: PETG
Diameter: 1.75 ± 0.02 mm
Net weight: 1 kg per spool
Length: About 320 m per 1 kg of 1.75 mm filament
Pack sizes: 1 kg, 3 x 1 kg, 6 x 1 kg, 10 x 1 kg
Print settings: 230-240℃ at 50-100 mm/s; 240-260℃ at 100-200 mm/s
Temperature range: 240-260℃, speed up to 300 mm/s
Drying: 60-65 °C in a blast drying oven
Storage: Sealed container with desiccant, humidity below 20% RH
In the box: 1 kg spool of PETG filament