
CIYISON 1Pc 5V 2 Two Channel Relay Module With Optocoupler For PIC ARM DSP AVR
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
A two-channel relay board for switching appliances and loads from a microcontroller. Each channel uses a SONGLE SPDT relay with one common, one normally-open and one normally-closed contact, plus an optocoupler for isolation from the logic side. It triggers on a low signal and releases on a high signal, and four 3.1 mm mounting holes make it easy to fix in a project box. It suits hobbyists and makers driving lamps, pumps or small motors from a PIC, AVR, ARM or DSP board; compared with bare relay modules it adds opto-isolation, but it is a low-level trigger board with no screw-terminal labeling beyond the relay markings.
In stockSold by CIYISON Co., LtdReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a 2-channel relay interface board that lets a microcontroller switch appliances and other equipment directly. It uses SONGLE relays and an opto-isolator on the board.
Each channel is a single-pole double-throw relay with one common port, one normally open contact and one normally closed contact. The board actuates at low level, with the indicator on, and releases at high level, with the indicator off. The opto-isolator gives the board anti-interference performance.
The relays are sealed and built for medium-power loads. Four mounting holes, each 3.1 mm in diameter, are provided for installation. One module is included.
It checks today's price at every store, compares the alternatives and answers in about a minute.










![Aqara Módulo para Interruptor Zigbee 2 canais 10A [T2] - DCM-K01](https://cdn.shopify.com/s/files/1/0514/8403/3175/files/AqaraDCM-K01-Img1.jpg?width=600)
