
Dual Relay Module Kit - 12v
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The NightFire Dual Relay Module Kit is a small 2.5 x 2.5 inch board carrying two independently controlled Form C relays with contacts rated 7 A at 250 VAC. Each relay has its own trigger input that works from 2 to 12 VDC, and the coil defaults to 12 VDC but can be changed. Screw terminals handle all inputs and outputs, and the plated through-holes plus four mounting holes make it easy to wire into a project box. It suits hobbyists and makers switching two mains or low-voltage loads from a microcontroller or sensor, where a bare relay board costs less than a packaged smart relay but needs your own enclosure and wiring.
In stockSold by NightFire Electronics LLCReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a dual relay module kit built on a 2.5 by 2.5 inch printed circuit board. It holds two relays that are controlled independently of each other, and each relay has an LED that lights when it is triggered.
The relay contacts are Form C and are rated for 7 amps at 250 VAC. The relay trigger voltage runs from 2 VDC to 12 VDC, and the relay coil voltage is selectable, with 12 VDC as the default. The board accepts other relays and other relay voltages.
Inputs and outputs connect through screw terminals. The PCB has plated through-holes and four mounting holes for installing the board.
It checks today's price at every store, compares the alternatives and answers in about a minute.



![Aqara Módulo para Interruptor Zigbee 2 canais 10A [T2] - DCM-K01](https://cdn.shopify.com/s/files/1/0514/8403/3175/files/AqaraDCM-K01-Img1.jpg?width=600)
