
CL15062 Atlas 80V Lithium-Ion 18" replacement saw chain
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The CL15062 is an 18-inch replacement saw chain for the Atlas 80V cordless chainsaw, model 56937. It is built to the 3/8 low-profile, .050 gauge, 62-drive-link spec, the same format as Oregon's 91PX AdvanceCut chain, so it fits any bar stamped 3/8LP .050 62DL. The chamfer chisel cutters have twin cutting corners, and the bumper drive link and depth-gauge design keep kickback low. It suits homeowners and light farm or orchard work on a battery saw, where the narrow kerf asks less of the motor than a larger-cutter chain.
In stockReturn policy
Buyers treat this as a direct replacement for the Atlas 80V saw's factory chain and value the low-vibration, low-kickback cut for home use. Most note it cuts cleanly when sharp and fits the stock bar without modification.
This is a replacement 18-inch saw chain for the Atlas 80V Lithium-Ion Cordless 18-inch model 56937. It also fits any bar stamped 3/8LP or 3/8 Low Profile in .050 gauge (1.3 mm) that takes 62 drive links. If your current drive link is stamped 91 and the chain has 62 drive links, this chain fits your saw.
The cutters are Chamfer Chisel with twin cutting corners, made to be durable and easy to maintain. The narrow kerf takes less power while cutting and lets the saw hold higher RPM. A bumper drive link combined with the depth gauge design reduces kickback, and the chain met the kickback performance requirement of ANSI B175.1-2012 when tested to that standard; as low-kickback chain it also meets CSA Standard Z62.3.
Sharpen the chain at 30 degrees with a 5/32-inch file. It is made in the USA.
It checks today's price at every store, compares the alternatives and answers in about a minute.







