This CleanFreak heated carpet cleaning extractor heats water internally to as much as 210° F using two inline heaters. It is the heated version of the CleanFreak non-heated carpet cleaning machine, with the same capacity and PSI. A heater and an internal circuit tester have been added.
It includes a 25' vacuum and solution hose set and an adjustable glide wand. The wand's design keeps it in contact with the carpet at different angles. It recovers 30% more solution than traditional wands.
The machine can pull upwards of 20 amps between the pump, vacuum motors and heater, so it should run on two separate electrical circuits. A green indicator light on the control panel shows when it is plugged into 2 separate circuits. If the light does not come on, turn off the heat or plug into a different circuit. Without the heater, it can run on a single circuit.
- Capacity
- 11 gallons
- Water temperature
- Up to 210° F
- Heaters
- Two 1000 watt inline heaters
- Hose
- 25' vacuum and solution hose set
- Wand
- Adjustable glide drag wand
- Draining
- Side dump valve and back dump hose
- Power draw
- Upwards of 20 amps with pump, vacuum motors and heater running
- Circuit tester
- Internal; green indicator light confirms 2 separate circuits
- Weight
- 95 pounds
- Brand
- CleanFreak