The CNHL Racing Series 5200mAh 3S is a softcase lithium polymer pack rated 90C continuous and 180C burst, wired with 10AWG leads and an EC5 plug. It charges to the standard 3S 12.6V, so no LiHV mode is needed. Buyers use it in brushless cars, trucks, boats and crawlers, and two matched packs can be run in series for a 6S 5200mAh setup. Owners report strong punch, little voltage sag under load and cells that stay balanced and survive hard running; the main trade-offs are the roughly 395g weight and the need to check tray size and connector before buying.
In stockReturn policy
Buyers rate it highly, praising punch, minimal voltage drop under maximum load and durability after hard use. Several say it outperforms their previous packs and balance charges to full capacity.
The CNHL Racing Series 5200mAh 11.1V 3S 90C LiPo battery is a high-output 3S pack for RC cars, trucks, boats and crawlers. It is also suited to dual-3S power systems. It has a 5200mAh capacity and a 90C continuous discharge rating, and it is intended for demanding brushless systems.
The pack uses a softcase design with 10AWG wires and an EC5 connector. It is a standard 3S LiPo that charges to 12.6V, so no LiHV charging mode is needed. One pack can power a compatible 3S vehicle, or two matched packs can be connected in series to form a 6S 5200mAh system.
Before installing, check the battery tray, connector, voltage and cable routing. The EC5 plug is physically compatible with the IC5 main power connection. Use a compatible LiPo balance charger set to three cells, and never charge unattended. Do not use a swollen, punctured, damaged or overheated battery.
It checks today's price at every store, compares the alternatives and answers in about a minute.









