This is a 16.5 ft indoor LED strip that puts full RGB color and tunable white on one dotless COB board, so you get color accents and clean white light from a single run. At 840 chips per meter and roughly 90 CRI, the light reads as a continuous line with no visible dots and good color accuracy. It runs on 24V DC at about 6 W per foot, so it needs a 24V driver and an RGB+CCT controller, neither of which is included. It suits cove, cabinet, ceiling and accent projects where a smooth line matters more than weatherproofing; the IP20 rating keeps it indoors. Against ordinary RGB strips it trades a wider 12mm board and a separate white channel for better whites and no dotting, and against plain white COB strips it adds color at the cost of a more complex controller setup.
In stockReturn policy
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Also available at
Store links may earn us a commission.
Lowest price we've seen: $34.99 on Nov 8 at Amazon; highest $36.98 on Nov 16. Tracked across 2 stores since Nov 8.
Buyers describe the strip as producing a perfectly smooth, continuous line with no visible LED dots. They call the RGB colors rich and vibrant and treat the tunable white as a strong bonus for the price of one strip.
This RGB CCT COB LED strip light combines color-changing RGB lighting with tunable white in a single dotless strip. It has 840 LEDs per meter on a 12mm-wide PCB, which gives smooth, continuous illumination. The strip runs on 24V DC and is 16.5 ft (5 meters) long.
Color changing, white tuning and dimming work with an LED controller. The strip has a CRI of about 90 and an IP20 rating, so it is for indoor use only and is not waterproof. It is intended for residential, retail and custom indoor lighting projects, including architectural, ambient and decorative lighting.
Professional installation is recommended. Consult a licensed electrician.
It checks today's price at every store, compares the alternatives and answers in about a minute.












