Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a prewired control kit for aftermarket FarDriver controllers: a SurRon-style throttle, a keyed voltmeter and a 3-speed switch, each with roughly 100 cm of cable so nothing needs extending. The throttle uses a metal housing with potted internals and a 2.8 mm 3-pin plug that goes straight into the FarDriver throttle port; the voltmeter reads up to 120V and the 3-speed switch plugs into the blue connector. It suits e-bike and SurRon-style builders running an aftermarket FarDriver who want plug-and-play wiring rather than splicing. Against buying the parts loose, the value is the prewired harness and sealed throttle; the catch is that it does not fit stock FarDriver connectors and the voltmeter must be wired with the battery disconnected.
Availability unknown
Also available at
Lowest price we've seen: $60.00 on Nov 12 at E-Conic Cycles. Tracked across 1 store since Nov 12.
This bundle includes a SurRon-style throttle, a key voltmeter and a 3-speed switch, all prewired for aftermarket FarDriver controllers. Each component is about 100 cm long, so no extension is needed. It is not for stock FarDrivers, because the factory connectors do not match.
The throttle has a metal housing and potted internals. It connects with a 2.8 mm, 3-pin plug into the throttle port of the FarDriver harness. The key voltmeter reads up to 120V. A pre-installed black waffle grip is available as an option.
Prewired items work only with the normal FarDriver harness. Kunray controllers alter that harness, so the orange wire must be depinned from their 2-pin connector and wired directly to the red wire from the key voltmeter. Normal encoder harnesses with a single 8-pin Furukawa connector work with this bundle. A harness with a 9-pin, 8-pin and 6-pin Furukawa connector on the primary harness (such as the FarDriver ND961800b HR) is not compatible.
