Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a prewired control bundle for FarDriver controllers: a SurRon-style throttle, a key voltmeter rated to 120V, and a 3-speed switch, all with roughly 100cm leads so nothing needs extending. The throttle uses a metal housing and potted internals, and it plugs into the FarDriver throttle port with a 2.8mm 3-pin connector. It suits e-bike and SurRon-style builders running a standard FarDriver harness who want a clean plug-and-play cockpit. Kunray kit owners should note the bundle is built for the normal FD harness, not Kunray's altered wiring.
In stockReturn policy
Also available at
Lowest price we've seen: $65.00 on Nov 12 at The Watts Shop. Tracked across 1 store since Nov 12.
This bundle includes a SurRon-style throttle, a key voltmeter and a 3-speed switch, all prewired for a FarDriver controller. Each component has about 100 cm of wire, so no extension is needed. Several Domino A360 grip options are offered.
The throttle has a metal housing and potted internals. It connects with a 2.8 mm, 3-pin connector that plugs into the throttle port of the FarDriver harness. The key voltmeter reads up to 120V.
The prewired items work only with the normal FarDriver harness. Kunray controllers alter that harness, so the orange wire must be depinned from their 2-pin connector and wired directly to the red wire from the key voltmeter. The bundle will not work with an encoder harness that has a 9-pin, 8-pin and 6-pin Furukawa connector on the primary harness. Normal encoder harnesses use only one 8-pin Furukawa connector.
