Is this filament compatible with non-Creality printers?

Yes. It is standard 1.75 mm PLA, so it works on most FDM printers that accept 1.75 mm filament and print PLA. Use the PLA profile for your printer and tune temperature if needed.

What nozzle and bed temperatures should I use?

Typical PLA settings apply: around 190–220°C at the nozzle and 50–60°C on the bed. Start in the middle of that range and adjust for your printer and print speed.

Does it need drying before use?

New sealed spools usually print fine straight away. PLA absorbs moisture over time, so store partly used spools in a dry box or with desiccant and dry them if prints start popping or stringing.

Is PLA strong enough for functional parts?

For light-duty brackets, jigs and household parts, yes. PLA is brittle and softens in heat, so use PETG, ABS or a tougher blend for load-bearing, hot or outdoor parts.

What is on the spool and how is it packed?

One 1 kg spool of 1.75 mm PLA filament, vacuum-sealed with desiccant. Check that the spool fits your holder; standard holders accept 1 kg spools.

What do buyers say about the Creality Soleyin Ultra PLA Filament 1.75mm 1kg?

Rated 5 out of 5 from 1,100 ratings.

Where can I buy the Creality Soleyin Ultra PLA Filament 1.75mm 1kg?

6 stores we checked sell it, including eBay, Best Buy, Creality USA, kurd electronic, Walmart.

Creality Soleyin Ultra PLA Filament 1.75mm 1kg

Best price now

$11.99at Best BuyChecked Nov 8

Compared across 7 stores. Prices are checked against each store and labelled with when.

Visit Best Buy

Creality Soleyin Ultra PLA Filament 1.75mm 1kg

Best price now

$11.99at Best BuyChecked Nov 8

Compared across 7 stores. Prices are checked against each store and labelled with when.

Visit Best Buy

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $11.99 at Best Buy on Nov 8.
Checked at 7 stores.

Our take on the Creality Soleyin Ultra PLA Filament 1.75mm 1kg

The Creality Soleyin Ultra PLA is a 1.75 mm PLA filament sold on 1 kg spools, aimed at everyday FDM printing on Creality and other open-material printers. PLA is the easiest material to print: low nozzle temperatures, minimal warping and little odor, which is why it dominates general-purpose printing. Against generic PLA it leans on Creality's brand and tight diameter tolerance rather than exotic properties; it is not a high-temperature or engineering filament. It suits beginners, hobbyists and anyone printing models, prototypes and household parts who wants predictable results without tuning.

Best forBeginners on their first spoolEveryday models, prototypes and household partsCreality printer owners wanting a matched brandClassroom and shared-printer use

Pros

Easy to print with low warping and little odor
1.75 mm diameter with tight tolerance for consistent extrusion
1 kg spool fits standard spool holders
Works on most open-material FDM printers, not just Creality
Wide color choice, including yellow

Cons

PLA is brittle and softens in heat, so not for car interiors or outdoor sun
Not suitable for functional parts needing strength or flex
Spool weight and winding vary by batch
Moisture pickup means it needs dry storage once opened

Creality Soleyin Ultra PLA Filament 1.75mm 1kg prices at every store

Best BuyNew
In stock
$11.99Checked Nov 8
Visit Best Buy
Creality USANew
In stock
$11.99Checked Nov 8
Visit Creality USA
kurd electronicNew
In stock
$12.20Checked Nov 8
Visit kurd electronic
WalmartNew
In stockSold by CREALITY STORE
$16.99Checked Nov 8
Visit Walmart
eBayRefurbished
In stockSold by creality_refurbished
$17.19Checked Nov 8
Visit eBay
Grooves-Inc.comNew
In stockShips from abroad · duties may apply
$35.17Checked Nov 8
Visit Grooves-Inc.com
eBayNew
Availability unknownSold by creality_refurbished (98.6% positive, 21,900 ratings)Returns: Set by the eBay seller; the eBay Money Back Guarantee covers an item that doesn't arrive or isn't as described.
$13.99Free shippingChecked Nov 8
Visit eBay
eBayPre-owned
Availability unknownSold by dollyds (100% positive, 706 ratings)Returns: Set by the eBay seller; the eBay Money Back Guarantee covers an item that doesn't arrive or isn't as described.
$12.00+ $7.76 shippingChecked Nov 8
Visit eBay

Store links may earn us a commission.

Creality Soleyin Ultra PLA Filament 1.75mm 1kg price history

Lowest price we've seen: $11.99 on Nov 9 at Creality USA. Tracked across 5 stores since Nov 9.

What reviewers say

5 / 51,100 ratings

With over a thousand ratings averaging five stars, buyers mostly report smooth, consistent prints and few clogs. Complaints are limited and tend to concern occasional tangles or brittleness rather than print quality.

What people mention

Print qualityPraisedBuyers say it extrudes evenly and produces clean layers with little stringing.
Diameter consistencyPraisedOwners report a steady 1.75 mm diameter that avoids clogs and under-extrusion.
Spool windingMixedMost spools wind cleanly, but some buyers hit tangles or cross-wound strands.
BrittlenessCriticisedA few users say the filament snaps when left under tension or in damp conditions.
AdhesionPraisedLayer and bed adhesion are described as reliable on standard PLA settings.

Specifications

Color: (Pla) Yellow
Weight: 2.2 lb heavy
Filament Diameter: 1.75 mmSource
Filament Material: PLASource
Weight (lb): 1.0Source

Questions and answers

Is this filament compatible with non-Creality printers?: Yes. It is standard 1.75 mm PLA, so it works on most FDM printers that accept 1.75 mm filament and print PLA. Use the PLA profile for your printer and tune temperature if needed.
What nozzle and bed temperatures should I use?: Typical PLA settings apply: around 190–220°C at the nozzle and 50–60°C on the bed. Start in the middle of that range and adjust for your printer and print speed.
Does it need drying before use?: New sealed spools usually print fine straight away. PLA absorbs moisture over time, so store partly used spools in a dry box or with desiccant and dry them if prints start popping or stringing.
Is PLA strong enough for functional parts?: For light-duty brackets, jigs and household parts, yes. PLA is brittle and softens in heat, so use PETG, ABS or a tougher blend for load-bearing, hot or outdoor parts.
What is on the spool and how is it packed?: One 1 kg spool of 1.75 mm PLA filament, vacuum-sealed with desiccant. Check that the spool fits your holder; standard holders accept 1 kg spools.
Where is the Creality Soleyin Ultra PLA Filament 1.75mm 1kg cheapest?: At Best Buy, for $11.99, as of our latest check.
What do buyers say about the Creality Soleyin Ultra PLA Filament 1.75mm 1kg?: Rated 5 out of 5 from 1,100 ratings.
Where can I buy the Creality Soleyin Ultra PLA Filament 1.75mm 1kg?: 6 stores we checked sell it, including eBay, Best Buy, Creality USA, kurd electronic, Walmart.