Creator 5 Multi Color 3D Printer
Best price now
$1,621.99at OfficeTapChecked Nov 10
Prices are checked against each store and labelled with when.
Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Flashforge Creator 5 is a CoreXY multi-color 3D printer with four independent toolheads on the FlashSwap system. It swaps materials in about 7 seconds with no purging, which cuts waste and avoids color bleeding that single-nozzle multi-color setups suffer from. It runs up to 600 mm/s with 30,000 mm/s² acceleration, hardened steel nozzles to 320°C, and automatic bed leveling plus toolhead offset calibration held within 0.04mm. It suits hobbyists and small shops that print multi-color or engineering filaments and want speed without hand-tuning, though it is a bigger, heavier machine than a single-nozzle bed-slinger.
In stockReturn policy
The Flashforge Creator 5 is a multi-color, multi-material 3D printer with four independent toolheads. Its FlashSwap system switches between materials in 7 seconds, with no purging and no color bleeding. Material efficiency is nearly 84%.
It has a CoreXY all-metal frame with a maximum speed of 600 mm/s and acceleration up to 30,000 mm/s². Vibration compensation and dynamic flow calibration keep high-speed prints accurate. The hardened steel nozzles reach 320°C and the flow rate is 32 mm³/s. The printer handles PLA, PETG, TPU 95A and carbon-fiber reinforced composites such as PA-CF.
Bed leveling and toolhead offset calibration are fully automatic, with alignment held within 0.04 mm. A built-in HD camera and LED strip, plus filament, jam and tangle detection, allow monitoring through the mobile app. Remote time-lapse is supported, and spaghetti detection is optional.
