FLASHFORGE Creator 5 4-Toolhead Changer 3D Printer
Best price now
$649.00at WellbotsChecked Nov 10
Prices are checked against each store and labelled with when.
Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Flashforge Creator 5 is a desktop FDM 3D printer with four independent toolheads that swap in about 7 seconds, so multi-color and multi-material jobs print without the purge cycles a single-nozzle machine needs. Because each color has its own nozzle, there is no color mixing and far less wasted filament, and one head can be reserved for a dedicated support material that peels away cleanly. It suits hobbyists and small shops that print multi-color models or need soluble or breakaway supports on complex geometry. Against single-nozzle multi-color printers it trades a higher machine cost and more calibration for cleaner output and lower material waste per print.
In stockReturn policy
The Flashforge Creator 5 is an FDM 3D printer with four independent toolheads for multi-color and multi-material printing. Each color or material has its own toolhead, so the printer switches between loaded toolheads instead of loading, unloading and purging filament for every change. The FlashSwap system preheats toolheads in the background and completes a tool change in 7 seconds. Purge waste is near zero, and filament waste is up to 80% lower than with single-nozzle multi-color printing.
The printer can print PLA, PETG, TPU, PETG-CF and support materials in a single job. One toolhead can be assigned only to support filament, which makes support removal easier and leaves smoother surfaces. It uses a rigid CoreXY motion system with automatic leveling, automatic multi-toolhead offset calibration and automatic flow calibration. Active vibration compensation helps keep print quality consistent.
A built-in 720p camera allows remote print monitoring. The printer detects filament run-out and can recover after a power outage. It has a 4-inch full-color touchscreen and connects by Wi-Fi or USB. It works with Orca-Flashforge and OrcaSlicer.
