This is a deionized water filter system for the final rinse of a car wash. It uses 5 L of mixed-bed resin to remove calcium, magnesium, and other dissolved ions from the rinse water. After a regular wash and rinse, the deionized water lets the car air dry to a spot-free finish without wiping.
The system is built as a cylindrical canister with a carry handle and two threaded ports on top. It comes with a TDS meter and a set of connectors, including US and EU standard 3/4-inch male and female fittings, quick connectors, and double-ended connectors. A filter housing gasket, protective sleeve, and roll of thread seal tape are also included.
Under average 200 ppm water, the rated capacity is up to 200 gallons (757 L). The TDS meter is used to check water purity, and resin replacement is recommended around 30 ppm. For use, rinse the car with regular water, apply soap, rinse the soap off with regular water, then do the final rinse with the deionized system and let the car air dry.
- Type
- Deionized water system for car wash final rinse
- Resin
- 5 L mixed-bed resin
- Rated capacity
- Up to 200 gallons (757 L) at average 200 ppm water
- TDS meter
- Included
- Resin replacement threshold
- Around 30 ppm
- Use
- Final rinse after regular wash; air dry for spot-free finish
- Housing
- Cylindrical canister
- Ports
- Two threaded ports on top
- Connections
- US and EU standard 3/4-inch male and female fittings, quick connectors, double-ended connectors
- Handle
- Carry handle
- In the box
- Connectors, filter housing gasket, protective sleeve, thread seal tape, TDS meter
- Shipping weight
- 6350 g (14 lb)