Is this blade good for ripping?

It can rip, but 60 fine teeth are slow in thick stock. A 24- to 40-tooth rip blade is the better choice for long rips.

Will it fit my table saw or miter saw?

It is a 10-inch blade with a standard arbor, so it fits most 10-inch table saws and miter saws. Check your saw's arbor size before buying.

What is a thin kerf blade good for?

It removes less wood per cut, so a lower-power saw strains less and cuts feel easier. The trade-off is a slightly less stiff plate.

Does it leave a smooth finish?

Yes. The 60 carbide teeth are aimed at fine finish work, and owners report clean crosscuts in hardwood and plywood.

Is it worth it over a general-purpose blade?

If you cut trim and crosscuts and want cleaner edges, yes. If you mostly rip thick lumber, a lower-tooth rip blade serves you better.

Delta S36-1060T58 ShopMaster 10 inch 60T Fine Finish Saw Blade

Best price now

$35.56at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Delta S36-1060T58 ShopMaster 10 inch 60T Fine Finish Saw Blade

Best price now

$35.56at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $35.56 at Walmart on Nov 10.

Our take on the Delta S36-1060T58 ShopMaster 10 inch 60T Fine Finish Saw Blade

The Delta ShopMaster 10-inch 60-tooth blade is a carbide-tipped fine-finish blade for table saws and miter saws. Its thin kerf removes less material, so a lower-powered saw cuts with less strain, and 60 teeth leave cleaner edges than a general-purpose 24- or 40-tooth blade. It suits trim, crosscuts and finish work in hardwood and plywood. Against premium fine-finish blades it is a value pick; owners rate it well overall, though some note it is not a heavy-ripping blade.

Best forTrim and finish carpentryCrosscutting hardwood and plywoodDIYers with a mid-power table sawMiter saw work needing clean edges

Pros

60 carbide teeth leave smooth crosscuts
Thin kerf eases the load on lower-power saws
Fits both table saws and miter saws
Carbide tips hold an edge through repeated use
Strong owner ratings for cut quality

Cons

Not meant for heavy ripping in thick stock
Fine teeth can burn or slow in wet, thick wood
Thin kerf plate is less stiff than full-kerf blades
No mention of a stabilizer or dampener in the box

Delta S36-1060T58 ShopMaster 10 inch 60T Fine Finish Saw Blade prices at every store

WalmartNew
In stock
$35.56Checked Nov 10
Visit Walmart

What reviewers say

4.6 / 542 ratings

Owners rate the blade highly, praising clean crosscuts and the easy cut from the thin kerf. Complaints center on slower feed in thick stock and the flex of a thin plate.

What people mention

Cut qualityPraisedOwners say crosscuts come out clean and splinter-free.
Thin kerfPraisedThe narrow cut is easy on lower-power saws.
DurabilityPraisedCarbide tips stay sharp through repeated use.
Thick stockCriticisedFeed slows and teeth can burn in thick or wet wood.
Blade flexMixedSome note the thin plate flexes under heavy feed.

About the Delta S36-1060T58 ShopMaster 10 inch 60T Fine Finish Saw Blade

The Delta ShopMaster is a 10-inch fine finish saw blade with 60 carbide-tipped teeth. It is made for smooth, clean cuts. The carbide tips are built for long wear.

The blade is used for ripping and crosscutting wood. Its thin kerf design helps it cut smoothly. It works with table saws and miter saws.

Blade size: 10 in
Teeth: 60, carbide-tipped
Finish: Fine finish
Kerf: Thin kerf
Cuts: Wood ripping and crosscutting
Compatibility: Table saws and miter saws

Specifications

size: 10"Source

Questions and answers

Is this blade good for ripping?: It can rip, but 60 fine teeth are slow in thick stock. A 24- to 40-tooth rip blade is the better choice for long rips.
Will it fit my table saw or miter saw?: It is a 10-inch blade with a standard arbor, so it fits most 10-inch table saws and miter saws. Check your saw's arbor size before buying.
What is a thin kerf blade good for?: It removes less wood per cut, so a lower-power saw strains less and cuts feel easier. The trade-off is a slightly less stiff plate.
Does it leave a smooth finish?: Yes. The 60 carbide teeth are aimed at fine finish work, and owners report clean crosscuts in hardwood and plywood.
Is it worth it over a general-purpose blade?: If you cut trim and crosscuts and want cleaner edges, yes. If you mostly rip thick lumber, a lower-tooth rip blade serves you better.
Where is the Delta S36-1060T58 ShopMaster 10 inch 60T Fine Finish Saw Blade cheapest?: At Walmart, for $35.56, as of our latest check.
What do buyers say about the Delta S36-1060T58 ShopMaster 10 inch 60T Fine Finish Saw Blade?: Rated 4.6 out of 5 from 42 ratings.