The DeWalt DCN930P1 is a 20V MAX XR brushless cordless framing nailer for 30 degree paper collated nails. It runs on a battery and needs no hoses or compressor. It handles a wide range of framing jobs.
An active flywheel stays active for 6 seconds after the trigger is released. In rapid sequential mode this removes ramp-up time between shots. The redesigned nose is built for toe-nailing, so you can align, grip and drive nails at aggressive angles. It drives nails up to 72% more sub-flush than the previous generation.
The tool weighs 8.65 lbs. (tool only) and takes nails up to 3-1/2 in. long. The magazine is high-strength magnesium. The springs and driver blade are field serviceable. It is Chip-Ready for the TOOL CONNECT system (Chip sold separately). An optional extended magazine (DZN920, sold separately) holds 2 strips of nails.
- Voltage
- 20V MAX XR
- Motor
- Brushless
- Nail type
- 30 degree paper collated
- Nail capacity
- Up to 3-1/2 in.
- Weight
- 8.65 lbs. (tool only)
- Magazine
- High-strength magnesium
- Per charge
- Up to 530 sq ft of subflooring or up to 100 ft. of wall framing
- Flywheel
- Stays active for 6 seconds after trigger release
- Compatibility
- Optional extended magazine DZN920 (sold separately)
- Tool tracking
- Chip-Ready for TOOL CONNECT (Chip sold separately)
- In the box
- Nailer, DCB205 battery, DCB1104 charger, belt hook and screw, no mar tip, manual, hex wrench, soft bag
