Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a complete pre-greased hub and drum assembly for 3,500 lb trailer axles with a #84 spindle. It comes with inner and outer bearings and races already packed with grease, a double-lip 1.719" seal, both standard and E-Z Lube grease caps, wheel nuts and spindle hardware. The 5 on 5-1/2" bolt pattern and 10" x 2-1/4" drum fit common 3.5K trailer axles, so it suits owners replacing a worn hub or servicing brakes on one side. Dexter is a major OEM trailer axle supplier, and buyers pick this kit for the complete hardware set rather than sourcing bearings, seals and nuts separately.
In stockReturn policy
Owners of 3,500 lb trailers generally treat Dexter hub and drum assemblies as a dependable OEM-grade replacement. The pre-greased bearings and included hardware are the points most often noted, while fitment mistakes on spindle or bolt pattern come up as the main frustration.
The Dexter K08-249-2G is a pre-greased hub and drum kit for 3,500 lb trailer axles with #84 spindles. It is used to replace or service an existing hub and drum assembly. The hub and drum is cupped and studded, with a 10" x 2-1/4" brake drum, a 5 on 5-1/2" bolt pattern and 1/2"-20 wheel studs.
The inner and outer bearings come pre-greased, which cuts preparation time and mess during installation. The kit uses an L68149 inner bearing and an L44649 outer bearing, with an L68111 inner race and an L44610 outer race. A double-lip grease seal, 1.719" ID x 2.565" OD, is included.
The kit works with both E-Z Lube and standard grease-lube setups. It includes standard and E-Z Lube grease caps, an E-Z Lube rubber plug, five 60-degree cone wheel nuts and the spindle retention hardware.
