Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a complete pre-greased hub and drum assembly for 3,500 lb Dexter trailer axles with the #84 spindle. It arrives with the L68149 inner and L44649 outer bearings and races already packed, plus the 1.718" grease seal, so you bolt it on instead of pressing and greasing bearings yourself. The 5 on 5" bolt circle and 1/2"-20 studs fit common 5-lug trailer wheels, and the kit includes both a standard and an E-Z Lube grease cap, five cone wheel nuts and the spindle retention hardware. It suits owners replacing a worn or damaged hub on a 3.5K axle and pairs with Dexter's 10" x 2-1/4" brake assembly. Compared with bare hubs, you pay for convenience and completeness rather than any performance gain.
In stockReturn policy
The Dexter K08-249-1G is a pre-greased hub and drum kit for 3,500 lb trailer axles with #84 spindles. It has a 5 on 5" wheel bolt pattern, 1/2"-20 wheel studs and a 1.718" grease seal. The bearings are included and the kit comes pre-greased, which reduces bearing preparation time during hub and drum replacement.
The assembly uses an L68149 inner bearing and an L44649 outer bearing, with matching races. The included 010-019-00 double-lip grease seal has a nominal 1.72" seal size. Dexter 3.5K brake applications use a 10" x 2-1/4" brake assembly.
The kit includes both a standard grease cap and an E-Z Lube® grease cap, plus an E-Z Lube rubber plug. It also includes five 60-degree cone wheel nuts and spindle retention hardware. An instruction sheet is part of Dexter's official kit contents.
