This is a handheld digital clamp multimeter for measuring AC current, AC and DC voltage and resistance, with diode and continuity tests. It also has a data hold function and a maximum reading display.
The clamp jaw opens up to 26 mm so a conductor can be measured without breaking the circuit. Readings appear on a 2000-count LCD that updates every two seconds, and the meter switches itself off after about 15 minutes of inactivity.
It runs on two AAA 1.5 V batteries, which are not included. The box holds the multimeter, a test pen, a storage bag and an instruction manual.
- Type
- Digital clamp multimeter
- Material
- ABS
- Display
- LCD, 2000 counts, updates every 2 seconds
- AC current range
- 2-400 A
- Voltage range
- 600 V
- Resistance range
- 200-200 kΩ to 2 MΩ
- Jaw opening
- Up to 26 mm
- Functions
- AC/DC voltage, AC current, resistance, diode and continuity tests, data hold, max reading
- Auto power off
- After about 15 minutes of inactivity
- Operating temperature
- 0 to 40 °C, below 80% RH
- Storage temperature
- -10 to 50 °C, below 85% RH
- Battery
- 2 x AAA 1.5 V (not included)
- In the box
- Multimeter, test pen, storage bag, instruction manual