A digital pressure gauge for measuring pressure on excavators and construction machinery. The 4-digit LCD reads in bar, PSI, MPa and kgf/cm² over a 0–700 bar (10,000 PSI / 70 MPa) range, with 0.2%FS accuracy at 20–25 °C and 0.4%FS from -10 to 50 °C.
The round gauge has a yellow faceplate with UNIT, ZERO, power and backlight buttons. The connector and shell are 304 stainless steel, the gauge is rated IP65, and it runs on 2 x 1.5 V AAA batteries with a sampling rate of 3 readings per second. It measures 80 x 46 x 125 mm (3.15 x 1.81 x 4.92 in).
The kit comes with a 5.2 ft (1.6 m) test hose threaded M16 x 2 at one end and 1/4-inch NPT at the other, two test couplings and a black silicone protector. It is used for pressure measurement, equipment support and calibration, and works with gases, liquids, oils and other non-corrosive media.
- Pressure Range
- 0–700 bar / 10,000 PSI / 70 MPa
- Display Units
- Bar, PSI, MPa, Kgf/cm²
- Accuracy
- 0.2%FS (20–25 °C); 0.4%FS (-10–50 °C)
- Overload Capacity
- 120% (10 MPa)
- Long-term Stability
- 0.2%FS/year
- Connection Type
- 1/4" NPT male
- Hose Threads
- M16 x 2 one end, 1/4" NPT the other
- Protection Class
- IP65
- Screen
- 4-digit LCD
- Power
- 3V (2 x 1.5V AAA batteries)
- Sampling Rate
- 3 times per second
- Dimensions
- 80 x 46 x 125 mm (3.15 x 1.81 x 4.92 in)
- Hose Length
- 5.2 ft (1.6 m)
- Materials
- Steel, acrylic, polyurethane; 304 stainless steel connector and shell
- Compatibility
- Excavators and construction machinery of most American brands
- Measuring Media
- Gases, liquids, oils and other non-corrosive media
- In the box
- 1 digital pressure gauge, 1 black silicone protector, 1 5.2 ft test hose, 2 test couplings