The lamp is a small LED reading light with a flat, flexible arm that bends to point the light where it is needed. A clip at one end fastens it to a book cover, e-reader or shelf edge, and the light head sits at the other end.
A push-button switch on the light head turns the lamp on and off. It comes on at 4500K neutral light by default, and quick presses switch between 3000K warm light, 5500K white light and off. Holding the button dims steplessly, from the current brightness up to 100% and then down to 8%.
The built-in 250 mAh ternary polymer lithium battery charges over USB in about 40 minutes and runs for about 3 to 15 hours depending on brightness. A red indicator lights while charging and goes out when the battery is full. The lamp remembers the last brightness used, and once it has been on for 30 seconds a press of the switch shuts it off quickly.
- Switch
- Push-button
- Mounting
- Magnetic clip
- Power supply
- USB
- Battery
- 250 mAh ternary polymer lithium battery
- Max brightness
- 50 lumens
- Color temperature
- 4500K, 3000K, 5500K (three levels)
- Dimming
- Stepless, 8% to 100%
- Runtime
- About 3 to 15 hours, depending on brightness
- Charging time
- About 40 minutes
- Charging indicator
- Red while charging, off when fully charged
- In the box
- Book light x1