This DJI Mic Mini 2 wireless system includes one transmitter, one mobile receiver and a charging case. The transmitter and receiver connect wirelessly using GFSK 2Mbps in the 2.400-2.4835 GHz band. Bluetooth 5.3 is also supported.
The transmitter weighs about 11 g without its magnetic clip and magnet. It runs for about 11.5 hours and charges in about 70 minutes. The runtime was measured with a 2 TX + 1 RX setup, noise cancellation off, close-range recording without interference, and the receiver connected to a camera through a 3.5 mm TRS camera audio cable.
The charging case holds a 1950 mAh battery and charges the transmitter and receiver. When charging two transmitters and one receiver at once, a fully charged case can fully charge them about 3.6 times.
- Transmitter size
- 28.58 × 28.04 × 13.52 mm (L × W × H)
- Transmitter weight
- About 11 g, without magnetic clip and magnet
- Receiver size
- 39.26 × 27.26 × 8.97 mm (L × W × H)
- Receiver weight
- About 6.5 g
- Case size
- 106.30 × 42.50 × 59.20 mm (L × W × H)
- Case weight
- About 159.3 g (charging case only)
- Wireless mode
- GFSK 2Mbps
- Operating frequency
- 2.400-2.4835 GHz
- EIRP
- Below 20 dBm
- Bluetooth
- Bluetooth 5.3, 2.400-2.4835 GHz, transmitter power (EIRP) below 20 dBm
- Transmitter battery
- Lithium-ion, 114 mAh, 0.45 Wh, 3.87 V
- Transmitter runtime
- About 11.5 hours
- Transmitter charging
- About 70 minutes, max 5 V, 5° to 45° C
- Case battery
- Lithium-ion, 1950 mAh, 7.55 Wh, 3.87 V
- Case charging
- About 2 hours, max 5 V, 3 A, 5° to 40° C
- Case charge cycles
- About 3.6 full charges for 2 transmitters and 1 receiver
- Operating temperature
- Transmitter and receiver: -10° to 45° C; case: 5° to 45° C
- Receiver charging temperature
- 5° to 45° C