DS18 Dual 8" Loaded High End Aluminum Subwoofer Enclosure 300 Watts Rms
Last price we saw
Prices change often: ask the agent below to check today's price at every store.
Prices are checked against each store and labelled with when.
Price facts
- Last seen at $129.99 at Milky Motorsports on Nov 2.
In stock now from DS18
Our take on the DS18 Dual 8" Loaded High End Aluminum Subwoofer Enclosure 300 Watts Rms
The DS18 Dual 8" Loaded Enclosure is a pre-built sealed box with two 8-inch subwoofers, rated 300 W RMS and 1,200 W peak, wired as dual 4-ohm voice coils. It is aimed at car audio fans who want a compact bass upgrade without building a box. The aluminum enclosure with an anodic black finish and steel baskets is built to resist vibration. It plays from 30 to 350 Hz with 83 dB sensitivity, so it needs a healthy amplifier to get loud.
- Loaded with two 8-inch subs, so no box building or driver matching
- Sealed aluminum enclosure resists flex and vibration
- Handles 300 W RMS and up to 1,200 W peak
- Dual 4-ohm coils allow 2-ohm or 8-ohm wiring
- Plays down to 30 Hz for its size
DS18 Dual 8" Loaded High End Aluminum Subwoofer Enclosure 300 Watts Rms prices at every store
- Milky MotorsportsNew
Availability unknown
$129.99Checked Nov 2 - All Thingz UTVNew
Availability unknown
$129.99Checked Nov 2
DS18 Dual 8" Loaded High End Aluminum Subwoofer Enclosure 300 Watts Rms price history
Lowest price we've seen: $129.99 on Nov 2 at Milky Motorsports. Tracked across 2 stores since Nov 2.
About the DS18 Dual 8" Loaded High End Aluminum Subwoofer Enclosure 300 Watts Rms
This is a loaded subwoofer enclosure with two 8-inch subwoofers mounted in an anodized black aluminum housing. It is a sealed design and is rated at 300 watts RMS and 1200 watts maximum.
The drivers use a steel basket, a ferrite magnet, a paper dust cap and a rubber surround. The enclosure is built to dissipate heat and to prevent unwanted vibrations and distortion from corrupting the audio signal. It connects through a hi-level input and mounts in a vehicle.
- Speaker type
- Subwoofer, dual 8"
- RMS power
- 300 W
- Max power
- 1200 W
- Impedance
- 4 + 4 Ohm
- Sensitivity
- 83 dB
- Frequency response
- 30-350 Hz
- Channels
- 1.0
- Enclosure type
- Sealed, passive active
- Connectivity
- Wired, hi-level input
- Mounting
- Car mount
- Material
- Aluminum enclosure; steel basket; ferrite magnet; paper dust cap; rubber surround
- Finish
- Anodic black
- Dimensions
- Height 9 in, width 9 in, depth 304 mm
- Weight
- 9.0 kg (gross master carton weight)
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Questions and answers
- What amplifier power does this enclosure need?
- It is rated 300 W RMS and 1,200 W peak. Match it with an amp that delivers roughly 300 to 500 W RMS at 2 ohms for clean output.
- How do I wire the dual 4-ohm coils?
- Wire the two subs in parallel for a 2-ohm load, or in series for 8 ohms. Most car amps will be happiest at 2 ohms.
- Will it fit in a small car?
- It is about 9 inches tall and 9 inches wide with a 304 mm depth, so check your trunk or hatch space. It suits compact hatches, trucks and SUVs better than tight coupes.
- Is this a ported or sealed box?
- It is a sealed enclosure. Sealed boxes give tighter, more accurate bass but less output than ported designs.
- Does it come with an amplifier or wiring?
- No. It is a passive loaded enclosure, so you need a separate mono amplifier and speaker wiring. It has hi-level inputs but no remote level knob.
- What does it sound like compared with a single 12-inch sub?
- Two 8s in a sealed box give quicker, tighter bass with more cone area, but a good 12 in a ported box will usually play louder and deeper.














