Prices are checked against each store and labelled with when.
The YYC-2 is a small DIN-style relay board that switches a 10A load from a 4–20V signal, with a 12V supply and opto-isolated input and output. It adds a programmable timer (0–999 seconds or minutes) set through a three-digit display and three buttons, plus anti-reverse supply protection and settings that survive power loss. It suits hobbyists and small automation jobs that need one delayed or triggered relay rather than a full PLC. Against generic timer relay modules it offers isolation and wide -40 to 85°C operation, but it is a single-channel board with no enclosure and a cryptic button-driven menu.
In stockSold by yifashengshopReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The YYC-2 is a 12V relay control module with normally open and normally closed contacts. It measures 64.2 mm × 34.8 mm × 18.5 mm and has a blue board. The module uses opto-isolated input and output and has anti-reverse protection on the supply.
It runs on 10–16V and accepts a signal voltage of 4–20V. The relay is rated for 10A at AC 220V or 10A at DC 30V. Settings are retained after power is removed, and the signal terminal voltage can be held for a long time.
P1-1 disconnects the relay after a set delay once triggered. P1-2 waits X seconds after a trigger, opens the relay for Y seconds, then closes it. P1-3 repeats an open period of X seconds and a disconnected period of Y seconds indefinitely, and P1-4 starts a countdown when the trigger signal disappears, closing the relay after X seconds; a new signal during the countdown keeps the relay energized and restarts the countdown when it ends.
It checks today's price at every store, compares the alternatives and answers in about a minute.











