Compared across 2 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A replacement controller and twist-throttle set for small brushed-motor e-bikes and scooters running 24V or 36V at 350W to 500W. The controller takes a 0.8V to 4.3V throttle signal, and the right-hand grip turns 0 to 70 degrees on standard 7/8-inch bars. An LED fuel gauge on the throttle shows battery level in three steps, and two keys switch the controller on and off. It suits riders repairing or building a basic brushed setup; it will not drive brushless motors, and it has no display, speedometer or pedal-assist sensor.
In stockSold by deeascy
In stockSold by Vensio Co. Ltd.Returns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Store links may earn us a commission.
Lowest price we've seen: $25.67 on Nov 11 at eBay. Tracked across 1 store since Nov 11.
This kit includes a brushed motor controller and a right-hand twist throttle grip for electric scooters and e-bikes. The controller drives 24V to 36V brushed DC motors rated from 350W to 500W. It regulates speed from a 0.8V to 4.3V throttle signal.
The twist throttle grip measures 10 x 2 cm and rotates from 0° to 70°. It fits standard 7/8-inch (22.2 mm) handlebars and has a 59-inch (1.5 m) wiring harness. A matching normal handlebar grip is included for the other side.
The throttle has an LED battery fuel gauge. Three green LEDs show a normal charge above 23V. Yellow shows half charge at 20V to 23V. Red shows a low charge below 20V.
