What temperature should I print Elegoo PETG at?

Most users print PETG around 230–250°C at the nozzle and 70–80°C on the bed. Start in the middle of that range and adjust for your printer and speed.

Does PETG need an enclosure?

No. PETG prints well on open printers and warps far less than ABS. An enclosure mainly helps with drafts and very large parts.

Is PETG food safe or dishwasher safe?

No. FDM prints have layer gaps that trap bacteria, and PETG softens well below dishwasher temperatures. Treat printed parts as decorative or functional, not food contact.

How is PETG different from PLA?

PETG is tougher, more flexible and holds up to higher heat than PLA. PLA is easier to print and gives sharper detail, while PETG suits brackets, holders and parts left in a warm car.

Does the filament need drying before use?

PETG absorbs moisture, so dry it if prints pop, bubble or look cloudy. A filament dryer or a low-temperature oven works.

What is on the spool?

One 1kg (2.2lb) spool of 1.75mm PETG filament. Check that your printer's spool holder takes a full 1kg roll.

ELEGOO PETG 3D Printer Filament 1.75mm Transparent Pink 1KG

Best price now

$18.99at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

ELEGOO PETG 3D Printer Filament 1.75mm Transparent Pink 1KG

Best price now

$18.99at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $18.99 at Walmart on Nov 11.

Our take on the ELEGOO PETG 3D Printer Filament 1.75mm Transparent Pink 1KG

Elegoo PETG is a 1.75mm filament on a 1kg spool, aimed at FDM printers with a standard hotend. PETG sits between PLA and ABS: it is tougher and more heat-resistant than PLA, prints at lower temperatures than ABS, and gives a translucent pink finish here. It is a general-purpose material for hobby printers, though it needs slower speeds and more tuning than PLA.

Best forHobbyists printing functional partsParts that need some heat and impact resistanceClear or translucent decorative printsStandard FDM printers with a heated bed

Pros

Tougher and more heat-resistant than PLA
Less warping and odor than ABS
1.75mm diameter suits most FDM printers
1kg spool gives a long run of prints
Translucent pink gives a glassy look on thin walls

Cons

Stringing and oozing need retraction tuning
Prints best slowly, so long jobs take longer
Sticks too well to bare glass and can chip it
Moisture pickup causes popping and cloudy prints

ELEGOO PETG 3D Printer Filament 1.75mm Transparent Pink 1KG prices at every store

WalmartNew
In stockSold by ELEGOO Official StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$18.99Free shippingChecked Nov 11
Visit Walmart

About the ELEGOO PETG 3D Printer Filament 1.75mm Transparent Pink 1KG

This is a PETG 3D printer filament in transparent pink. It is 1.75mm filament and comes on a 1 kg (2.2 lb) spool.

The filament is translucent and made for high-precision printing. It is strong and durable, and it fits most FDM 3D printers.

Material: PETG
Diameter: 1.75mm
Color: Transparent pink
Weight: 1 kg (2.2 lbs) spool
Compatibility: Most FDM 3D printers

Specifications

color: PinkSource

Questions and answers

What temperature should I print Elegoo PETG at?: Most users print PETG around 230–250°C at the nozzle and 70–80°C on the bed. Start in the middle of that range and adjust for your printer and speed.
Does PETG need an enclosure?: No. PETG prints well on open printers and warps far less than ABS. An enclosure mainly helps with drafts and very large parts.
Is PETG food safe or dishwasher safe?: No. FDM prints have layer gaps that trap bacteria, and PETG softens well below dishwasher temperatures. Treat printed parts as decorative or functional, not food contact.
How is PETG different from PLA?: PETG is tougher, more flexible and holds up to higher heat than PLA. PLA is easier to print and gives sharper detail, while PETG suits brackets, holders and parts left in a warm car.
Does the filament need drying before use?: PETG absorbs moisture, so dry it if prints pop, bubble or look cloudy. A filament dryer or a low-temperature oven works.
What is on the spool?: One 1kg (2.2lb) spool of 1.75mm PETG filament. Check that your printer's spool holder takes a full 1kg roll.
Where is the ELEGOO PETG 3D Printer Filament 1.75mm Transparent Pink 1KG cheapest?: At Walmart, for $18.99, as of our latest check.