The Elegoo Saturn 3 is an MSLA resin 3D printer built around a 10-inch 12K mono LCD with a resolution of 11520 x 5120 and an XY resolution of 19 x 24 μm. Its build volume is 218.88 x 122.88 x 250 mm, or 8.62 x 4.84 x 9.84 inches.
A COB light source and Fresnel collimating lens emit a 405 nm light beam. The light angle stays within 5°, light uniformity is over 90%, and the light-scattering coefficient is within 0.5%. The build plate has a laser-carved surface for adhesion, and a replaceable 9H tempered glass layer protects the LCD from scratches and resin damage.
The printer runs at a printing speed of up to 70 mm/h and works with Voxeldance Tango software, which offers a static mode and a dynamic mode that includes smooth and high-speed settings. The open-source GOO slice file format is compatible with third-party slicers such as CHITUBOX and Lychee Slicer. Noise emission is 50 dBA.
- LCD
- 10-inch 12K mono LCD
- LCD resolution
- 11520 x 5120
- XY resolution
- 19 x 24 μm
- Build volume
- 218.88 x 122.88 x 250 mm³ (8.62 x 4.84 x 9.84 in)
- Light source
- COB with Fresnel collimating lens
- Wavelength
- 405 nm
- Light angle
- Within 5°
- Light uniformity
- Over 90%
- Light-scattering coefficient
- Within 0.5%
- Build plate
- Laser-carved surface
- Screen protection
- Replaceable 9H tempered glass
- Printing speed
- Up to 70 mm/h