Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
eSun PETG Matte is a 1.75mm 3D printing filament that pairs PETG's toughness with a low-gloss, matte finish that hides layer lines and cuts glare. eSun rates it up to 195% stiffer and 183% stronger than standard PETG, with a heat deflection temperature up to 71 °C and good water resistance. That makes it a fit for functional parts, brackets, jigs and outdoor pieces where a glossy surface would look out of place. Against ordinary PETG it trades some of the easy, slightly flexible printing behavior for rigidity and a cleaner look; against PLA it wins on heat and moisture resistance but needs higher nozzle temperatures and slower speeds.
In stockShips from Australia · duties may applyReturn policy
eSUN PETG Matte is a 1.75 mm PETG filament for 3D printing. It gives prints a smooth, low-gloss matte surface that hides layer lines and reduces glare. It is made for functional parts that need both strength and a clean appearance.
Compared with standard PETG, it has a bending modulus of 2405 MPa versus 1228 MPa, about 195% higher. Its bending strength is 77 MPa versus 42 MPa, about 183% higher. Its heat deflection temperature is up to 71 °C, versus about 60 °C for standard PETG.
The filament is water-resistant and suits functional and outdoor parts. It prints with stable adhesion and minimal warping.
