What is PETG good for compared with PLA?

PETG is tougher and holds up better to heat and outdoor use than PLA. PLA still prints more easily and with finer detail, so use PETG for functional parts and PLA for display models.

Does it need a heated bed?

Yes. PETG prints best on a heated bed, typically around 70 to 80 C, with a nozzle around 230 to 250 C. A printer without a heated bed will struggle with it.

Will it fit my printer?

It is 1.75 mm filament on a 1 kg spool, the size most common desktop printers use. Check that your spool holder accepts a standard 1 kg roll.

How should I store it?

Keep the spool sealed with a desiccant when not in use. PETG absorbs moisture, which causes popping, stringing and weak layers; drying it before a long print helps.

Why does PETG string so much?

PETG is prone to oozing and stringing. Lowering nozzle temperature slightly, raising retraction and slowing the print reduce it, though some stringing is normal.

What bed surface works best?

A PEI sheet or glue stick on glass works well. PETG can bond too strongly to bare glass, so use a release layer to avoid chipping the surface.

Lumeo

PETG 3D Printer Filament 1.75mm Multi Color Optional Smooth Stable Printing

Best price now

$57.35at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Lumeo

PETG 3D Printer Filament 1.75mm Multi Color Optional Smooth Stable Printing

Best price now

$57.35at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $57.35 at Walmart on Nov 11.

Our take on the PETG 3D Printer Filament 1.75mm Multi Color Optional Smooth Stable Printing

Lumeo PETG is a 1 kg spool of 1.75 mm filament for fused-deposition 3D printers. PETG is the middle ground between PLA and ABS: tougher and more heat-resistant than PLA, easier to print and less prone to warping than ABS. It suits hobbyists printing functional parts, brackets, containers and outdoor items. Compared with budget PETG spools, the value here rests on consistent diameter and smooth feeding rather than on specialty blends or high-speed formulations.

Best forHobbyists printing functional and outdoor partsPLA users wanting more toughness and heat resistanceOwners of printers with heated beds that handle PETGMakers who print brackets, containers and jigs

Pros

PETG is tougher and more heat-resistant than PLA
Less warping and easier to print than ABS
1.75 mm diameter fits the most common printer class
1 kg spool gives a long run between changes
Smooth, stable feed suits long prints

Cons

PETG strings and oozes more than PLA
Needs a heated bed and slower speeds than PLA
Can stick too well to bare glass and damage it
Moisture pickup means drying before use helps
Limited to one color per spool

PETG 3D Printer Filament 1.75mm Multi Color Optional Smooth Stable Printing prices at every store

WalmartNew
In stockSold by Lingling Trading StoreReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$57.35Free shippingChecked Nov 11
Visit Walmart

About the PETG 3D Printer Filament 1.75mm Multi Color Optional Smooth Stable Printing

This is PETG filament for 3D printing, with a 1.75 mm diameter. It is made for smooth, stable printing.

It weighs 1000 g and measures 21 x 21 x 7.8 cm.

Material: PETG
Diameter: 1.75 mm
Color: Black
Weight: 1000 g
Dimensions: 21 x 21 x 7.8 cm
Use: 3D printing

Specifications

color: BlackSource
actual_color: BlackSource

Questions and answers

What is PETG good for compared with PLA?: PETG is tougher and holds up better to heat and outdoor use than PLA. PLA still prints more easily and with finer detail, so use PETG for functional parts and PLA for display models.
Does it need a heated bed?: Yes. PETG prints best on a heated bed, typically around 70 to 80 C, with a nozzle around 230 to 250 C. A printer without a heated bed will struggle with it.
Will it fit my printer?: It is 1.75 mm filament on a 1 kg spool, the size most common desktop printers use. Check that your spool holder accepts a standard 1 kg roll.
How should I store it?: Keep the spool sealed with a desiccant when not in use. PETG absorbs moisture, which causes popping, stringing and weak layers; drying it before a long print helps.
Why does PETG string so much?: PETG is prone to oozing and stringing. Lowering nozzle temperature slightly, raising retraction and slowing the print reduce it, though some stringing is normal.
What bed surface works best?: A PEI sheet or glue stick on glass works well. PETG can bond too strongly to bare glass, so use a release layer to avoid chipping the surface.
Where is the PETG 3D Printer Filament 1.75mm Multi Color Optional Smooth Stable Printing cheapest?: At Walmart, for $57.35, as of our latest check.