This is an external canister filter with a built-in pump for freshwater and seawater aquariums. The cylindrical barrel is made of ABS, with a lid held by clear latches, a black valve fitting on top and a black hose connector on the side. It sits outside the tank and moves water through the filter and back again.
Inside the barrel, four biological filtering layers and one basic filtering layer are stacked from top to bottom: a coarse filter sponge, a medium filter sponge, two thin filter sponges and a basic filtering layer. Space is left at the top and at the bottom of the barrel for adding other filter media.
The 6W pump is quiet and low on power use, with a flow rate of 600 L/h and a maximum height of 35.4 in (0.9 m) to keep water circulating through the filter. An inlet adjuster lets you set the flow. It suits tanks with a height under 19.7 in (50 cm) and a length under 39.4 in (1 m). All the fittings connect to each other and no tools are needed.
- Material
- ABS
- Dimensions
- 7.1 x 6.3 x 13 in (18 x 16 x 33 cm)
- Weight
- 1.73 lb (785 g)
- Pump power
- 6W
- Flow rate
- 600 L/h
- Max height
- 35.4 in (0.9 m)
- Voltage
- 110V, 60Hz (US standard)
- Hose size
- 0.63 in (16 mm) OD, 0.47 in (12 mm) ID, 59 in (1.5 m) length
- Power cord
- 68.9 in (175 cm)
- Tank compatibility
- Height under 19.7 in (50 cm) and length under 39.4 in (1 m)
- Filtration layers
- Coarse filter sponge, medium filter sponge, 2 thin filter sponges, 1 basic filtering layer
- Assembly
- No tools required
- In the box
- Filter barrel with pump, 2 hoses (inlet and outlet), inlet adjuster, inlet component set, outlet component set, user manual