This kit is used to make plaster models of teeth. It is formulated with model powder and gypsum powder, and it is designed to capture clear form details of the teeth.
To make an impression, mix 12 grams of model powder with 30 milliliters of water. Stir quickly for 30 to 45 seconds until smooth, with no lumps or bubbles. Mixing and placing the material in the tray should take no more than 1 minute 30 seconds, and a higher temperature makes it cure faster.
Bite the loaded tray for one minute, then remove it and let the impression dry for one hour. Check that it is clear and complete, with no bubbles, detachment, deformation or defects. For the model itself, mix 40 grams of gypsum powder with 14 milliliters of water, stir for 30 to 45 seconds until smooth, and pour it into the impression.
- Model powder
- Semi-water calcium sulfate, kaolin, gypsum powder, sodium alginate
- Impression mix
- 12 g model powder with 30 ml water
- Model mix
- 40 g gypsum powder with 14 ml water
- Mixing time
- 30 to 45 seconds
- Working time
- Within 1 minute 30 seconds from mixing to placing in the tray
- Bite time
- 1 minute
- Drying time
- 1 hour after removing the tray