Is the ETS EC 150/5 worth $649?

For daily professional finishing work, yes: the brushless motor, low vibration and dust control justify the price over time. For occasional DIY use, a cheaper 6-inch sander does most of the same work.

What is the difference between the 150/5 and the 150/3?

The 150/5 has a 5 mm orbit for faster removal with a still-fine finish. The 150/3 has a 3 mm orbit for the finest finishing passes and is slower to cut.

Does it come with sandpaper and a dust hose?

It ships as a bare tool with the sanding pad; discs and a dust extraction hose are separate purchases. Budget for both if you are starting from scratch.

Will it work with a non-Festool dust extractor?

Yes, if the hose fits the 27 mm port. Dust pickup is tuned to Festool's MULTI-JETSTREAM 2 discs, so use those for the best results.

Is the 220 V version safe to plug in in the US?

No. A 220 V tool needs a 220 V outlet or a step-up transformer; check the voltage of the unit you order before buying.

Festool holds prices tightly, so discounts are rare. Watch for bundle deals with abrasives or an extractor rather than expecting a deep cut on the tool alone.

Festool ETS EC 150/5

Last price we saw

$649.00at Amazon, last seen Nov 3

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Our take on the Festool ETS EC 150/5

The Festool ETS EC 150/5 is a corded 6-inch random orbital sander with a brushless EC-TEC motor, 400 W of power and a 5 mm orbit. It runs 6,000 to 10,000 orbits per minute with stepless speed pre-selection, and its MULTI-JETSTREAM 2 hole pattern feeds Festool's dust extraction. The 5 mm orbit makes it a finishing sander rather than a stock remover. At $649 at Amazon as of November 3, 2026, it sits at the top of its recent range; only one store lists it new.

Best forFinish sanding and paint prep on flat panelsWoodworkers already on the Festool extractor systemCabinet and furniture makers wanting low-dust sanding